EXMART K1 Star MT6737M Android 6.0 Official Firmware Flash Files

By | Wednesday, Jun 28 2017 1:50PM

EXMART K1 Star MT6737M Android 6.0 Official Firmware Flash Files

Exmart K1 4G VoLTE mobile features a 5.0″ (12.7 cm) display with a screen resolution of 480 x 854 pixels and runs on Android v7.0 (Nougat) operating system with Google security patch (factory reset protection enabled). The device is powered by Quad-core, 1.2 GHz, Cortex A7 processor paired with 1 GB of RAM. As far as the battery is concerned it has 2500 mAh. Over that, as far as the rear camera is concerned this mobile has a 5 MP camera. Other sensors include Accelerometer. So, does it have a fingerprint sensor? No, it doesn’t. For graphical performance that can make games run smoothly, this phone has got a Mali-400 MP GPU. On board, storage is at 8 GB with the option to expand the memory by Yes Up to 32 GB. The design is one of the most important factors when it comes to mobiles. This phone is 9.3 mm slim and weighs 158 grams.

As I write in this article that Exmart K1 Star comes with latest google factory reset protection. So if you going to hard reset or flashing the stock firmware, Then please before you do that or follow the below-flashing procedure make sure that you have removed the Google Gmail Account from the phones setting > Accounts>

Readme Once: Take a Backup: If you are going to flash the above Firmware on your MediaTek device, then take a backup of important data such as Contacts, Call logsSMS, and other data as because your personal data will be deleted after flashing the stock firmware.

1- Backup your Call Log – Contacts – Sms – Etc With G Backup

2- Backup your current Firmware With MTK Droid Tool

3- Backup your backup IMEI NVRAM

The firmware shared on this page is officially released by the company and helps you to recover your Phone if you ever got software error, update error, hanging, Unknown Baseband, IMEI Null and dead issue.

How To Flash EXMART K1 Star MT6737M Android 6.0 MArshmallow With Sp Flash Tool:

Download   SP Flash Tool.  –  MTK  Android USB Drivers.  –  EXMART K1 Star Flash Files

  1. Extract And Run SP flash tool.
  2. Install MTK  android USB drivers.
  3. Then download Firmware file/Flash file/Rom for your phone from below.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When SP flash tool open, go to download button in SP flash tool.
  7. In download tab, click on scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in SP flash tool.
  11. Close SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy.
  13. After the flashing process starts, it might take up to 510 minutes. So keep patience and wait.

Follow Detailed Instruction Flashing With Sp Flash Tool.