Download Official Stock Firmware Flash File For Ephone EP11. If you have an Ephone EP11 Smartphone. and You want to download the Stock ROM – Flash File For it.
Then You are in the right place, You have to do this by using the Below Tutorial. Sometime when we are trying to gain root access and installing CWM or TWRP recovery. You might have tried to root it. However, if you do not like the custom ROMs you have installed and want to go back to the original operating system
Anyway, all the solution to your problems with your phone is currently available in this article. You just need some material like Ephone EP11 Stock ROM, USB drivers, and flash tool that is in it.
For the ease of my readers, I have divided this method into different parts.
1. In the first section, we will talk about the Ephone EP11 Firmware (flash file) benefits and link it to download.
2. The other part is the necessary tools and pre-requirements to install the Ephone EP11 Firmware.
3. And in the last part, we will guide you How to flash this Ephone EP11 ROM file,
To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a comment.
The Advantages Of Stock ROM:
A Soft Brick or a Software Brick, is usually just when you’re Ephone EP11 is stuck in a boot loop, and as the name implies, is caused by a software error on Ephone EP11.
Usually the lack of a system to boot from or some other minor software bug that glitching boot.
They are easily fixable by flashing the stock ROM on Ephone EP11 through recovery or with SP Flash Tool.
If your Ephone EP11 device turns to a soft-brick, it may:
- Keeps Rebooting;
- Boots Straight Into Recovery;
- Boots Straight Into its Bootloader;
- Freeze at the startup screen or boot Animation;
Pre-requirements to Install Ephone EP11 Firmware:
- Supported Phone: Ephone EP11
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
1. Take Ephone EP11 Backup
Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.
Most smartphones automatically make a backup in the background, in case something happens. But to make sure you take everything to your new device, you need a full backup.
2. Download Ephone EP11 Flashing Tool And Drivers:
A. Download and install Ephone EP11 Drivers. This is for basic communication between your device and PC.
These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
B. We use the Sp flash tool for this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Ephone EP11.
I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Ephone EP11.
- Please read and understand the Full Guide Before Flashing Ephone EP11 Firmware.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Before flashing, Stock ROM Ephone EP11 must have a 70–80% charge.
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!
Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
Instructions to Install Ephone EP11 Firmware:
1. Download Ephone EP11 stock ROM zip file given above and extract it on your computer.
2. Download Ephone EP11 USB driver and set up it on your computer. In case if in case you have already put in a USB driver in your computer skip this step.
3. Next, switch off your Ephone EP11 smartphone and take away the battery (it’s removable).
4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover the “Flash_tool.exe” file in it. Launch it.
5. As soon as the SP Flash tool is launched, click on on “Download” tab.
6. Now, click on on “Scatter-loading” button within the download tab.
7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.
8. Now click on on the “Download” button to start out the flashing process.
9. Next, join your Ephone EP11 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.
10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.
As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.
11. Now, shut the SP Flash tool in your computer and unplug your smartphone.
That’s it. Now you’ve successfully flashed stock ROM firmware in your Ephone EP11 Android device.
Follow Detailed Instruction Ephone EP11 Firmware Flashing With Sp Flash Tool.
Ephone EP11 Stock ROM Details:
|Device Supported:||Ephone EP11|
|Tool Supported:||SP Flash Tool|