EKO Star G50 Firmware Flash File [Stock ROM Unbrick Guide]:
EKO Star G50 Firmware Flash File. Download Official Stock Firmware Flash File For EKO Star G50. If you have EKO Star G50 Smartphone and You want to download the Stock ROM – Flash File For it then You are on a Correct Place, You have to do this by following the Below Guide.
This article contains the EKO Star G50 Firmware Flash File that will allow you to recover your EKO Star G50 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds on the device, brick your device, modify your device and also come back that device to the factory state.
Please Read and understand the Full Guide Before Flashing EKO Star G50 Firmware Flash File.
Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
Make sure that the USB drivers for your device are installed on the computer.
Your smartphone must have a 70–80% charge.
Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
How to Write IMEI: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices
Instructions to Install Firmware on EKO Star G50:
Step 1. Install Spreadtrum Drivers.
Step 2. Install the SPD Download Tool.
Step 3. Open the Research download tool > bin folder.
Step 4. Launch ResearchDownload.exe.
Step 5. Click on the Load Packet icon (top left corner).
Step 6. In the window that pops up, navigate to the location of the .pac file, select it then click Open.
Step 7. The PAC file should now be loaded (its name should appear at the top).
Step 8. Click the Settings Icon (top left corner).
Step 9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.
Step 8. Click the Start downloading button.
Step 9. You should see Waiting…. under the Progress bar.
Step 10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.
Step 11. Once flashing is complete, you’ll see Passed.
Step 12. Click on the Stop downloading icon then disconnect the phone from PC and boot.
Follow Detailed Instruction Flashing EKO Star G50 Firmware Flash File With Spreadtrum Upgrade.