This article contains the Huawei G730-U10 Firmware Flash File. That will allow you to recover your Huawei G730-U10 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version.

The Advantages Of Huawei G730-U10 Stock ROM:

• Flash Stock To Unbrick your Huawei G730-U10
• Fix boot loop issue
• Update and Downgrade
• Unroot or Fix Bugs
• To solve the lag or stutter on
• Fix software issues.
• Return to stock for warranty coverage.

Huawei G730-U10 Of Stock ROM Details:

• Gapps File: Included
• Device Supported: Huawei G730-U10
• Tool Supported: SP Flash Tool
• Processor: MediaTek
• Os: Android 4.2.2

How To Install Huawei G730-U10 Firmware With Sp Flash Tool

Download

Huawei_Ascend_G730-U10_V100R001C00B112CUSTC428D001_India_4.2.2_EMUI_2.0_05021MLP.zip

HUAWEI_G730-U10_Firmware_Android_4.2.2_EMUI_2.0_05021MUF_V100R001C00B112_Angola.zip

Pre-requirements to Install Huawei G730-U10 Firmware:

• Supported Phone: Huawei G730-U10
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

Take Huawei G730-U10 Backup:

• First Create a copy of your Call Log – Contacts – Sms – Etc With G Backup
• Second Make a duplicate of current Huawei G730-U10 Firmware With MTK Droid Tool
• Third backup Huawei G730-U10 IMEI NVRAM

Download Huawei G730-U10 Flashing Tool And Drivers:

Besides these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

There are different reasons why we will use Sp Flash Tool to unbrick the Huawei G730-U10. I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Huawei G730-U10.

• Huawei G730-U10 Flash Tool: Download the latest SP Flash tool and extract it (Install)
• Huawei G730-U10 VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
• Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)

Read Also: Huawei G730 U10 Secure Boot DA File [Format Single Partition]

Disclaimer:

• Please Read and understand the Full Guide Before Flashing Huawei G730-U10 Stock ROM.
• Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
• In addition, Make sure that the USB drivers for your device are installed on the computer.
• Before flashing, Stock ROM Huawei G730-U10 must have a 70–80% charge.
• Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Huawei G730-U10 Firmware:

1. First Of All Extract And Run SP flash tool.
2. Also, Install MTK Android USB drivers.
3. Then download Huawei G730-U10 Firmware.
4. Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
5. Now open the SP flash tool.exe.
6. Afterward, go to download button in SP flash tool.
7. Next In the download tab, click on the scatter load button at the right.
8. After locating the g730-u10 scatter file, click on the download button on the top left.
9. Immediately connect your smartphone with a USB cable, and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
10. When flashing is completed, finally a green ring will appear in SP flash tool.
11. Close SP flash tool on your computer and unplug the phone.
12. Power on the phone and enjoy.
13. After the flashing process starts, it might take up to 5–10 minutes surely. So keep patience and wait.