The specific Cherry Mobile Blaze 2.0 Firmware comes with a Stock ROM of Cherry Mobile Blaze 2.0. This helps you to bypass the FRP lock and revert from root and custom ROM.
Why would you want to flash Firmware on your Cherry Mobile Blaze 2.0?
There are various reasons to flash (Firmware on Cherry Mobile Blaze 2.0).
For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it. Suppose you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.
The Benefit Of Stock Firmware:
- Flash Stock ROM to unbrick
- Update and downgrade
- Unroot or fix bugs on the phone
- To solve the lag or stutter
- Fix software issues.
- Revert to stock to get your warranty
- Keeps rebooting issue
- If your phone boots straight into recovery
- Phone boots straight into its bootloader
Cherry Mobile Blaze 2.0 Firmware Details:
- Gapps: Included
- Device Supported: Cherry Mobile Blaze 2.0
- Tool Supported: SP Flash Tool
- Soc: MediaTek MT6589
- Os: Android
Download:
[quads id=2]Requirements To Flash Cherry Mobile Blaze 2.0 Stock ROM:
- Charge your mobile: Your phone may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
 Take Full Backup
Before going to install stock ROM, you need to take a backup of all your messages, photos, and apps from your smartphone.
Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.
Download Cherry Mobile Blaze 2.0 Flash Tool And Drivers:
A. Download and install Cherry Mobile Blaze 2.0 Drivers—the necessary communication between your device and PC.
These drivers are mainly for the devices powered by the MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
B. We use the Sp flash tool as Cherry Mobile Blaze 2.0 Flash Tool because this tool is very efficient and support all kind of MTK phones.
Instructions to Flash Cherry Mobile Blaze 2.0 Stock ROM:
1. First of all, Download the ‘Cherry Mobile Blaze 2.0 flash file zip‘ which is given above, and extract it on your computer’s desktop. Also, download and extract the sp flash tool.
2. Then download the USB driver and set it up on your computer. In case you have already installed the USB driver on your computer, skip this step.
3. Next, switch off your smartphone and take away the battery (if it is removable).
4. Now go to the sp flash tool extract folder and launch it.
5. As soon as the SP Flash tool is launched, click on the Download tab.
6. Now, click on the Scatter-loading button within the download tab.
7. Choose the scatter file from the firmware extract folder.
8. Now click on the Download button to start the flashing process.
9. Next, connect your phone to your computer using the USB cable (without battery – if the battery is removable) and press the volume up or volume down button at the same time.
10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.
As soon as it’s over, you will notice the Download OK green ring in SP Flash Tool.
Now, close the SP Flash tool and unplug your smartphone.
That’s it. Now you’ve successfully flashed stock ROM on your Cherry Mobile Blaze 2.0.
Follow Detailed Instruction To Flash Firmware With Sp Flash Tool.
Disclaimer:
- Read and understand the Full Guide before flashing.”Cherry Mobile Blaze 2.0 Firmware”.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of the information in this guide.
- Before flashing, Stock ROM must have a 70–80% charge.
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of MTK phones, you will have a brick even if you download these blocks read from a phone which you own!
Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
