How To Flash Lenovo Vibe P1 P1a41 Firmware [Stock ROM]

 

Welcome To all in one thread for Lenovo Vibe P1 P1a41 in this post I will share all kinds of Lenovo Vibe P1 P1a41 Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Lenovo Vibe P1 P1a41 software upgrade.

Why would you want to flash Firmware on your Lenovo Vibe P1 P1a41?

“Lenovo Vibe P1 P1a41 Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is Lenovo Vibe P1 P1a41 Stock Rom.

The other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

The Benefit Of Lenovo Vibe P1 P1a41 Stock Firmware:

• Fix the boot loop problem
• Upgrade and Downgrade
• Unroot or Fix Bugs on your phone
• Fix the lag or stutter on
• Revert to stock to gain your warranty
• Will able to receive OTA Updates

Lenovo Vibe P1 P1a41 Firmware Details:

• Gapps: Included
• Device Supported: Lenovo Vibe P1 P1a41
• Tool Supported: QPST Tool – QFIL Qualcomm Flash Image Loader
• Processor: Qualcomm
• Os Ver: Android

Download:

• Lenovo P1a41 S271 Q202531 20160602.zip

Pre-requirements to Install Lenovo Vibe P1 P1a41 Stock ROM:

• Supported Phone: Lenovo Vibe P1 P1a41
• Charge your mobile: You may no less than a half charge.
• Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Lenovo Vibe P1 P1a41 Full Backup

Before going to install Lenovo Vibe P1 P1a41 stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

Download Lenovo Vibe P1 P1a41 Flash Tool And Drivers:

A. Download and install Lenovo Vibe P1 P1a41 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the QFIL QPST Flash Tool for as Lenovo Vibe P1 P1a41 Flash Tool because of this tool is very efficient and support all kind of Qualcomm phones.

Instructions to Flash Lenovo Vibe P1 P1a41 Stock ROM:

1. Download and install the driver and tool above. Then launch the QFIL tool.

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY and plug in the USB cable to connect to the computer.

3. On the QFIL tool, select the files, in turn, select the files in the ROM folder.

4. After clicking Download, wait for the flash process to finish, the time is about 5-10.

5: During the flashing process, your device will restart automatically.

6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, You have successfully installed Stock ROM using QFIL Flash tool.

Follow Detailed Instruction Firmware Flashing With Qfil Flash Tool.

Disclaimer:

• Read and understand the Full Guide before flashing.”Lenovo Vibe P1 P1a41 Firmware”.
• Use these instructions at your own risk.
• Before flashing, Stock ROM must have a 70–80% charge.