Download Galaxy A26 5G SM-A266B Firmware Flash File (All Binary)
The Samsung Galaxy A26 5G (SM-A266B) delivers a seamless 5G experience with a 6.5-inch FHD+ Super AMOLED display, ensuring vibrant visuals and smooth scrolling. Powered by an efficient 5 G-ready chipset, it offers lag-free multitasking and gaming, supported by a long-lasting 5,000mAh battery with 25w fast charging.
Table of Contents
The triple-camera setup (50mp main, 5mp ultra-wide, and 2mp macro) captures sharp photos, while the 13mp front camera enhances selfies and video calls. Running on Android 14 with One UI 6, it provides a user-friendly interface with Samsung’s latest software optimisations. With expandable storage (up to 1TB), a side-mounted fingerprint sensor, and Dolby Atmos audio, the Galaxy A26 5G balances performance, affordability, and future-ready connectivity.
Step-by-Step Guide to Flash Stock Firmware on Samsung Galaxy A26 5G (SM-A266B)
This guide will walk you through flashing the official stock firmware on your Samsung Galaxy A26 5G (SM-A266B) using Odin, Samsung’s trusted flashing tool. You’ll need the correct firmware file for your model, Samsung USB drivers, and the latest version of Odin.
Flashing the stock ROM can resolve critical software issues like boot loops, unresponsive touchscreen, performance lag, soft/hard bricking, FRP lock, or forgotten passwords. It also restores your device to its original factory state, removing bloatware or unstable custom modifications.
⚠ Warning: Flashing incorrect firmware or improper steps can permanently brick your device. Ensure you download the exact firmware for SM-A266B and follow the instructions meticulously. Proceed only if you fully understand the risks involved.
| Flash File Name: SM-A266b_a266bxxs2ayc1_meo.rar Build Number: A235MUBSAEYB1 Version: Binary 2 U2 Firmware Model: SM-A235M/DS Android Version: 14 | Download |
Steps to Install Firmware File on Samsung Galaxy A26 5G SM-A266B
Pre-Requirements:
-
- Supported Phone: Galaxy A26 5G SM-A266B
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
- Identify the Binary Version
Installation Guide
-
- Download Odin and USB Drivers on your PC.
- Download and extract the Firmware File on your computer.
- Switch off your Smartphone.
- To enter Download Mode, press and hold the Volume Down, Home, and Power buttons together for 5-8 seconds.
- When in Download mode, press Volume Up to continue.
- Open the Odin flash tool and connect your Smartphone to the computer.
- Odin will show an “Added” message once the device is recognised.
- Select the Galaxy A26 5G SM-A266B firmware file and click Start in Odin to begin flashing.
- Flashing typically takes about 5 minutes.
- After flashing, Odin will display a Green Box with “Pass,” and the Smartphone will reboot automatically.
To verify the installed firmware, go to Settings -> About Phone -> Software Information. Check the “Baseband version” for the firmware number.