Back To Android 2.36 N7000
[box type=”info” align=”” class=”” width=””]Please Read and understand the Full Gudie before Performing Any Action.[/box]
[box type=”warning” align=”” class=”” width=””]Warning:- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.[/box]
1-make sure the s USB driver are installed on your pc.
2-unzip the file.
3-open the Odim as administrator.
4-finalize all process KIES in windows process manager, if you have not KIES installed, go to next step.
5-disconnect your device.
6-press the volume keys down + home + power when entering the confirmation screen, connect the USB cable and press the volume up key, and under no circumstances unplug the cable.
7-in Odim, you select Auto Reboot and F. Reset Time, select only these two options.
8-In PDA place: CODE_N7000XXLA1_CL868264_REV02_user_low_ship.tar (this file is inside the extracted folder Rom FULL 2.3.6)
9-In PHONE place: MODEM_N7000XXLA1_REV_05_CL1093393.tar (this file is inside the extracted folder Rom FULL 2.3.6)
10-At CSC put: GT-N7000-MULTI-CSC-OXALA1.tar (this file is inside the extracted folder Rom FULL 2.3.6)
11-click START, and wait for the device reiniciar.só remove the USB cable when the word PASS at Odim, this whole process can take 5 business 15min.
12 after the device fully restart, select the language and go to the dialer and enter the code * 2767 * 3855 #, this code is to do a full wipe, this will ensure that the system is without any trace of another system, zeroing all bugs.
13 after the device restarts, you are ready to proceed with the updates you want.
This tutorial is a last resort for those who are unable to solve a serious problem on your device, it goes back to 2.3.6, then you have to download the most atuias roms, ics or jb and make updates they deem necessary