Dexp Ursus B350 Firmware Flash File [Nougat ROM]

Dexp Ursus B350 Firmware is the software which is provided by the vendor or You may say that the software. which was installed by the manufacturer of the phone is Stock Rom. the other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory. Flash memory holds the Android’s firmware. the same as most other portable devices with an embedded OS.

Dexp Ursus B350 Firmware Flash File [Nougat ROM]

The  Dexp Ursus B350 is Run on Android 7.0 Nougat OS Powered by MediaTek MT6737 Processor, it is a Dual SIM (GSM and GSM) Smartphone/Tablet, Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the phone include the Proximity sensor, Accelerometer, and Ambient light sensor.

Dexp Ursus B350 Firmware Flash File [Nougat ROM]:

All you have to do is simply download the below-given Dexp Ursus B350 firmware files and tools on your PC. And then follow the given instruction to install the Stock ROM on Dexp Ursus B350 using SP Flash Tool. Yes, this guide is also helpful to recover unroot. Or fix any software malfunctioning problem. To install Stock firmware on Dexp Ursus B350 Mediatek powered device. You need software known as SP Flash Tool. Also called Smartphone Flash tool Download the Dexp Ursus B350 Stock Firmware. Drivers and SP flash tool then you can follow our guide to install the firmware on Dexp Ursus B350.

We will use Sp Flash Tool to unbrick the Dexp Ursus B350 as we use for DEXP AS160. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Dexp Ursus B350.

SP flash tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

The Benefit Of Dexp Ursus B350 Firmware:

  • Flash Stock To Unbrick your Dexp Ursus B350
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Dexp Ursus B350
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Dexp Ursus B350
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Dexp Ursus B350 Firmware Details:

  • Gapps File: Included
  • Device Supported: Dexp Ursus B350
  • Tool Supported: SP Flash Tool
  • Processor: Media-Tek MT6737

Download: Dexp Ursus B350 Firmware 7.0 MT6737.zip

Pre-requirements to Install Stock Firmware on Dexp Ursus B350:

  • Supported Phone: Dexp Ursus B350
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Flashing Tool And Drivers:

  • Dexp Ursus B350 Flash Tool: Download the latest SP Flash tool and extract it (Install)
  • Dexp Ursus B350 VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Dexp Ursus B350 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Firmware on Dexp Ursus B350:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Dexp Ursus B350 Firmware for your phone.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When SP flash tool open, go to download button in SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in SP flash tool.

Step 11: Close SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Dexp Ursus B350 Firmware Flashing With Sp Flash Tool.

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Do NOT follow this link or you will be banned from the site!
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for aiomobilestuff.com

Close