Flashing stock firmware on Cube Power M3 Firmware using the flash tool. This is a step by step guide showing how to flash Cube Power M3 stock ROM File with Sp flash tool.
Why would you want to flash Firmware on your Cube Power M3?
There are various reasons to flash Firmware on Cube Power M3. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it. If you want to hard reset your phone and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are.
The Benefit Of Cube Power M3 Firmware:
- Flash Stock ROM To Unbrick
- Update and downgrade
- Unroot or fix bugs on the phone
- To solve the lag or stutter
- Fix software issues.
- Revert back to stock to get your warranty
- Keeps rebooting issue
- if your phone boots straight into recovery
- Phone boots straight into its bootloader
Cube Power M3 Firmware Details:
- Gapps File: Included
- Device Supported: Cube Power M3
- Tool Supported: SP Flash Tool
- Processor: MediaTek
- OS: Android 7.XX
Download Cube Power M3 Flash File:
Requirements to flash Cube Power M3 Stock ROM:
- Supported Phone: Cube Power M3 Stock ROM
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
1. Take Cube Power M3 Firmware Backup
Before going to install Cube Power M3 stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.
How To Backup Android Phone Before Flashing Stock Firmware
2. Download Cube Power M3 Flash Tool And Drivers:
A. Download and install Cube Power M3 Drivers. This is for basic communication between your device and PC.
These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
B. We use the Sp flash tool for as Cube Power M3 Flash Tool this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Cube Power M3.
I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Cube Power M3.
Instructions to Flash Cube Power M3 Stock ROM:
1. Download Cube Power M3 flash file zip file is given above and extracts it in your computer.
2. Download Cube Power M3 USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.
3. Next, switch off your Cube Power M3 smartphone and take away the battery (it’s removable).
4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover the “Flash_tool.exe” file in it. Launch it.
5. As soon as the SP Flash tool is launched, click on on “Download” tab.
![How To Flash Cube Power M3 Firmware File [ROM] 1](https://aiomobilestuff.com/wp-content/uploads/2019/03/3-2-1024x635.jpg "How To Flash Cube Power M3 Firmware File [ROM] 1")
6. Now, click on on “Scatter-loading” button within the download tab.
7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.
8. Now click on on the “Download” button to start out the flashing process.
9. Next, join your Cube Power M3 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.
10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.
As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.
11. Now, shut the SP Flash tool in your computer and unplug your smartphone.
That’s it. Now you’ve successfully flashed stock ROM firmware in your Cube Power M3 Android device.
Follow Detailed Instruction Cube Power M3 Firmware Flashing With Sp Flash Tool.
Disclaimer:
- Please read and understand the Full Guide Before Flashing Cube Power M3.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Before flashing, Stock ROM Cube Power M3 must have a 70–80% charge.
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!
Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.