Cherry Mobile Astro 2S Firmware

in this article, you will learn how you can flash Cherry Mobile Astro 2S Firmware File. So if you are in this article, then either your phone is working properly. Or want to frp bypass on Astro 2S.

You might have tried to root it. However, if you do not like the custom ROMs you have installed and want to go back to the original operating system

Anyway, all the solution to your problems with your phone is currently available in this article. You just need some material like Cherry Mobile Astro 2S Stock ROM, USB drivers and flash tool that is in it.

For the ease of my readers, I have divided this method into different parts.

- Advertisement -

1. In the first section, we will talk about the Cherry Mobile Astro 2S Firmware (flash file) benefits and link it to download.

2. The other part is the necessary tools and pre-requirements to install the Cherry Mobile Astro 2S Firmware.

3. And in the last part, we will guide you How to flash this Cherry Mobile Astro 2S ROM file,

To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a comment.

[quads id=2]

The Advantages Of Cherry Mobile Astro 2S Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re Cherry Mobile Astro 2S is stuck in a boot loop, and as the name implies, is caused by a software error on Cherry Mobile Astro 2S.

Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the stock ROM on Cherry Mobile Astro 2S through recovery or with SP Flash Tool.

If your Cherry Mobile Astro 2S device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;
  • Cherry Mobile Astro 2s FRP bypass

Cherry Mobile Astro 2S Stock ROM Details:

Gapps File: Included
Device Supported: Cherry Mobile Astro 2S
Tool Supported: SP Flash Tool
Processor: MediaTek MT6580
Os: Android Marshmallow 6.0
Download: Cherry_Mobile_Astro_2S_MT6580_V1.06_20171031.zip

[quads id=2]

Pre-requirements to Install Cherry Mobile Astro 2S Firmware:

  • Supported Phone: Cherry Mobile Astro 2S
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

1. Take Cherry Mobile Astro 2S Backup

Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

How To Backup Android Phone Before Flashing Stock Firmware


2. Download Cherry Mobile Astro 2S Flashing Tool And Drivers:

A.  Download and install Cherry Mobile Astro 2S Drivers. This is for basic communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Cherry Mobile Astro 2S.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Cherry Mobile Astro 2S.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Cherry Mobile Astro 2S Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM Cherry Mobile Astro 2S must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Cherry Mobile Astro 2S Firmware:

1. Download Cherry Mobile Astro 2S stock ROM zip file given above and extract it in your computer.

2. Download Cherry Mobile Astro 2S USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Cherry Mobile Astro 2S smartphone and take away the battery (it’s removable).

Switch Off Cherry Mobile Astro 2S

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

Start SPFT For Cherry Mobile Astro 2S Firmware Flash

5. As soon as SP Flash tool is launched, click on on “Download” tab.

How To Flash Cherry Mobile Astro 2S Firmware File [ROM] 1

6. Now, click on on “Scatter-loading” button within the download tab.

Cherry Mobile Astro 2S Firmware Scatter Loading

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

Select Cherry Mobile Astro 2S Firmware

8. Now click on on the “Download” button to start out the flashing process.

Press Download For Cherry Mobile Astro 2S Firmware

9. Next, join your Cherry Mobile Astro 2S Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

Cherry Mobile Astro 2S Firmware Download Complete

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware on your Cherry Mobile Astro 2S Android device.

Follow Detailed Instruction Cherry Mobile Astro 2S Firmware Flashing With Sp Flash Tool.

2 COMMENTS

Comments are closed.