This article contains the Celkon A10 Firmware Flash File. That will allow you to recover your Celkon A10 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

If your Celkon A10 device is corrupt or bricked. Download Celkon A10 firmware from here. (based on your device model number) and flash it on your smartphone or tablet. To get it back to a working condition again. In this post, we share Celkon A10 official Flash file we test this ROM on many phones it,s work well. To download the official firmware of Celkon A10 and flash with any chines Mobiles flashing tool or box.

Celkon A10 Firmware Flash File [Stock ROM]:

We will use Sp Flash Tool to unbrick the Celkon A10 as we use for Celkon A89. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Celkon A10.

SP flash tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is use on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

[quads id=2]

The Benefit Of Celkon A10 Firmware:

• Flash Stock To Unbrick your Celkon A10
• Fix boot loop issue
• Update and Downgrade Celkon A10
• Unroot or Fix Bugs
• To solve the lag or stutter on Celkon A10
• Fix software issues.
• Return to stock for warranty coverage.

Celkon A10 Firmware Details:

• Gapps File: Included
• Device Supported: Celkon A10
• Tool Supported: SP Flash Tool
• Processor: MediaTek
• Os: Android 4.4.2

Download

Celkon A10 Firmware 4.2.2.zip

[quads id=2]

Pre-requirements to Install Celkon A10 Firmware:

• Supported Phone: Celkon A10
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

Take Phone Backup:

• • Backup your Call Log – Contacts – Sms – Etc With G Backup
  • Backup your current Firmware With MTK Droid Tool
  • Backup your backup IMEI NVRAM

Flashing Tool And Drivers:

• Celkon A10 Flash Tool: Download the latest SP Flash tool and extract it (Install)
• Celkon A10 VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
• Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)

Disclaimer:

• Please Read and understand the Full Guide Before Flashing Celkon A10 Stock ROM.
• Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
• Make sure that the USB drivers for your device are installed on the computer.
• Your smartphone must have a 70–80% charge.
• Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Celkon A10 Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Celkon A10 Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When SP flash tool open, go to download button in SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in SP flash tool.

Step 11: Close SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.