CCIT A70W Firmware Flash File [Kitkat 4.4.2]

In case you’ve bricked your Phone. or Wish to clean install the CCIT A70W Firmware. then you definitely are in the best place. CCIT A70W is base on MTK CPU. To install Stock firmware on CCIT A70W Media Tek powered device. you need Flashing Tool known as Sp Flash Tool. also called Smart Phone Flashing Tool. Download the CCIT A70W Stock Firmware. drivers, and SP flash tool, then you can carry out our instructions on setting up the firmware on CCIT A70W.

CCIT A70W Firmware Flash File [Kitkat 4.4.2]

Download CCIT A70W Firmware. If you have a CCIT A70W Smartphone. And You want to download the Stock ROM – Flash File For it. Then You are on a Correct Place, You have to do this by following the Below Guide.


CCIT A70W Firmware Flash File [Kitkat 4.4.2]

We will use Sp Flash Tool to unbrick the CCIT A70W as we use for CCIT J7 Pro. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your CCIT A70W.

SP flash tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

The Benefit Of CCIT A70W Firmware:

  • Flash Stock To Unbrick your CCIT A70W
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade CCIT A70W
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on CCIT A70W
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

CCIT A70W Firmware Details:

  • Gapps File: Included
  • Device Supported: CCIT A70W
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6572
  • Os: Android 4.4.2

Pre-requirements to Install CCIT A70W Firmware:

  • Supported Phone: CCIT A70W
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Flashing Tool And Drivers:


  • Please Read and understand the Full Guide Before Flashing CCIT A70W Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install CCIT A70W Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download CCIT A70W Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When SP flash tool open, go to download button in SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in SP flash tool.

Step 11: Close SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

CCIT A70W Firmware Flash File [Kitkat 4.4.2] 1

Follow Detailed Instruction CCIT A70W Firmware Flashing With Sp Flash Tool.

Search Tags:

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Do NOT follow this link or you will be banned from the site!
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for