Stock Firmware

Calme CM9 Firmware Flash Stock ROM

Calme CM9 Firmware Flash Stock ROM


Download Calme CM9 Firmware from right here. flash it in your device and enjoy the native Android expertise once more. The download file contains the USB driver, flash tool, and the scatter file.

This article contains the Calme CM9 Firmware Flash File. That will allow you to recover your Calme CM9 mobile into its initial Factory state.

Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

Calme CM9 Firmware Flash Stock ROM

We will use the Sp Flash Tool to unbrick the Calme CM9. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Calme CM9.

[quads id=2]

The Advantages Calme CM9 Firmware:

  • Flash Stock To Unbrick your Calme CM9
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Calme CM9
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Calme CM9
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Calme CM9 Firmware Details:

  • Gapps File: Included
  • Device Supported: Calme CM9
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6732
  • Os: Android 4.4.4


[quads id=2]

Pre-requirements to Install Calme CM9 Firmware:

  • Supported Phone: Calme CM9
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Download Calme CM9 Flashing Tool And Drivers:


  • Please read and understand the Full Guide Before Flashing Calme CM9 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Calme CM9 Firmware:

Extract And Run SP flash tool.

Install MTK  android USB drivers.

Then download Calme CM9 Firmware.

Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Now open SP flash tool.exe.

When the SP flash tool opens, go to the download button in the SP flash tool.

In the download tab, click on the scatter load button.

After locating the scatter tab, click on the download button.

Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

When flashing is completed, a green ring will appear in the SP flash tool.

Close the SP flash tool on your computer and unplug the phone.

Power on the phone and enjoy it.

After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Calme CM9 Firmware Flashing With Sp Flash Tool.

Back to top button