In this particular post, I will show you how to bypass the Itel Alpha Lite W5008 FRP Security lock without flashing the Stock Firmware or box. This will also help you to remove google account from Itel Alpha Lite W5008.
How To Bypass FRP Lock On Itel Alpha Lite W5008 (Remove Google Account)
If you perform a Factory Data Reset on Itel Alpha Lite W5008, all settings come back to the factory default settings.
Almost all files are removed, such as documents and downloaded applications. For those who have a Google Account set up on Itel Alpha Lite W5008 FRP is active.
This means that after the reset, you’ll be required to sign in to the Google Account using the login name and security password.
For those who have many different Google Accounts set up on the Itel Alpha Lite W5008, can sign in using any of the accounts.
The Benefit Of Itel Alpha Lite W5008 Frp Remove File:
- No need to flash Stock Firmware
- No Imie Unknown Risk
- No dead boot risk
Itel Alpha Lite W5008 Frp Bypass File Details:
- Device Supported: Itel Alpha Lite W5008
- Tool Supported: SPD Flash Tool
- Processor: SPD
Requirements to Bypass Itel Alpha Lite W5008 Frp:
- Supported Phone: Itel Alpha Lite W5008
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
1. Take Itel Alpha Lite W5008 Firmware Backup
Before going to install “ Itel Alpha Lite W5008 Frp File” you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.
Most smartphones automatically make a backup in the background, in case something happens. But to make sure you take everything to your new device, you need a full backup.
Download Itel Alpha Lite W5008 Flash Tool And Drivers:
A. Download and install Itel Alpha Lite W5008 USB Drivers. The basic communication between your device and PC.
These drivers are mainly for the devices powered by SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
B. We use the SPD Upgrade Tool I believe this tool is very efficient. Follow the step by step procedure to use One Click Frp Tool and remove google account from your Itel Alpha Lite W5008.
Instructions to Bypass FRP On Itel Alpha Lite W5008 With Frp File:
1: Download and Install Spreadtrum Drivers from the above-given link.
2: Now Download and setup Install the SPD Download Tool.
3: Open the Research download tool > bin folder.
4: Launch Research Download.exe.
5: Click on the Load Packet icon (top left corner).
6: In the window that pops up, navigate to the location of the Itel Alpha Lite W5008 Frp File, select it then click Open.
7: The Itel Alpha Lite W5008 Frp bypass file should now be loaded (its name should appear at the top).
8: Click the Settings Icon (top left corner).
9: In the box that pops up, untick any item(s) you do not wish to flash then click OK.
10: Next Click the Start downloading button.
11: You should see Waiting under the Progress bar.
12: Switch off the Itel Alpha Lite W5008 phone (still with battery inside) then connect it to the PC
(note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.
13: Once the FRP bypass is complete, you’ll see Passed.
14: Click on the Stop downloading icon then disconnect the phone from PC and boot.
Done! Now you just have to do a factory reset through the recovery of your Itel Alpha Lite W5008. You will no longer be asked to enter a Google account to unlock your smartphone and you will have completely removed the Itel Alpha Lite W5008 FRP block.