Home Stock Firmware Micromax Bolt Mega Q397 Firmware Flash File

Micromax Bolt Mega Q397 Firmware Flash File [Stock ROM]

Bolt Mega Q397 Firmware Flash File Stock ROM

 

Download Official Stock Firmware Flash File For Bolt Mega Q397. If you have Bolt Mega Q397 Smartphone. And You want to download Micromax Bolt Mega Q397 Firmware – Flash File For it. Then You are on the Correct Place, You have to do this by following the Below Guide.

Remember this guide is also very much needed in case of upgrade or downgrade the Micromax Bolt Mega Q397 Firmware on Micromax Bolt Mega Q397. First of all, download the software, Smartphone Flash Tool on your PC and then flash your phone back to Stock ROM.

Now here we come with a full working guide on how to install Stock ROM and on Micromax Bolt Mega Q397. Some cases, We have bricked our Micromax Bolt Mega Q397, after that, we can bring back the phone (Unbrick) with the Stock Firmware anytime.

Also if you think your Micromax Bolt Mega Q397 lag or has a problem, then flash the Stock ROM through the list below and save from the situation. Stock Firmware does not void a warranty on the Micromax Bolt Mega Q397.

Micromax Bolt Mega Q397 Firmware Flash File [Stock ROM]:

We will use the SPD Download Tool to unbrick the Spreadtrum Devices With Stock ROM Flash Files as we use for Micromax spark go. This tool is really very efficient. Just follow the step by step procedure to use One Click Unbrick Tool and unbrick your SPD Phone.

SPD Download Tool and it is used to Manually Upgrade or flash Spreadtrum Android Smartphone or Tablet. SPD Download Tool is used to flash only Stock Rom or Custom OR Stock Firmware on Spreadtrum Devices. Flash File comes in .zip Format. To use the Spd Factory Update tool Flash Stock ROM first need to properly install the latest Spreadtrum Drivers.

[quads id=2]

The Benefit Of Micromax Bolt Mega Q397 Firmware:

  • Flash Stock To Unbrick your Micromax Bolt Mega Q397
  • Fix boot loop issue
  • Update and Downgrade Micromax Bolt Mega Q397
  • Unroot or Fix Bugs
  • To solve the lag or stutter on Micromax Bolt Mega Q397
  • Fix software issues.
  • Return to stock for warranty coverage.

Micromax Bolt Mega Q397 Firmware Details:

  • Gapps File: Included
  • Device Supported: Micromax Bolt Mega Q397
  • Tool Supported: SPD Flash Tool
  • Processor: SPD

Download

[quads id=2]

Pre-requirements to Install Micromax Bolt Mega Q397 Firmware:

  • Supported Phone: Micromax Bolt Mega Q397
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

Take Phone Backup:

Micromax Bolt Mega Q397 Flashing Tool And Drivers:

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Micromax Bolt Mega Q397 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Bin Packet load Error When Flashing Micromax Bolt Mega Q397 Firmware: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing Micromax Bolt Mega Q397 Firmware: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Instructions to Install Micromax Bolt Mega Q397 Firmware:

Step 1. Install Spreadtrum Drivers.

Step 2. Install the SPD Download Tool.

Step 3. Open the Research download tool > bin folder.

Step 4. Launch ResearchDownload.exe.

Step 5. Click on the Load Packet icon (top left corner).

Step 6. In the window that pops up, navigate to the location of the Micromax Bolt Mega Q397 Firmware.pac file, select it then click Open.

Step 7. The PAC file should now be loaded (its name should appear at the top).

Step 8. Click the Settings Icon (top left corner).

Step 9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.

Step 8. Click the Start downloading button.

Step 9. You should see Waiting…. under the Progress bar.

Step 10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.

Step 11. Once flashing is complete, you’ll see Passed.

Step 12. Click on the Stop downloading icon then disconnect the phone from PC and boot.

Follow Detailed Instruction Micromax Bolt Mega Q397 Firmware Flashing With Spd Flash Tool.

Exit mobile version