Format A Single Partition In Asus Live G500TG using Asus Live G500TG Secure Boot DA File. This is a step by step guide showing how to format a single partition of an Asus Live G500TG using SP flash tool.
Why would I want to format a single partition on my Asus Live G500TG?
There are different causes why one might want to format a single partition on an Asus Live G500TG. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons, all you need is to format user data and cache partitions. The method below will show how we can do this.
Note:
1. open folder
2. extract flash tool and open flash tool
3. select da file in FRP folder
4. select scatter file
5. formate with FRP address ( 0x2d88000 0x100000 )
6. FRP done but dl image failed to show your screen
7. fix dl image failed flash with cache file job done.
FRP address
0x2d88000
0x100000
Requirements to format one single partition on my Asus Live G500TG:
- Supported Phone: Asus Live G500TG
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
Take Asus Live G500TG Backup:
- First Create a copy of your Call Log – Contacts – Sms – Etc With G Backup
- Second Duplicate current Asus Live G500TG Firmware With MTK Droid Tool
- Third backup Asus Live G500TG IMEI NVRAM
Download Asus Live G500TG Flashing Tool And Drivers:
- Asus Live G500TG Flash Tool: Download the latest SP Flash tool and extract it (Install)
- Asus Live G500TG USB driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
- Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)
Asus Live G500TG Secure Boot DA File Detail:
- File Name: S4 IX626B Boot DA
- Device Supported: Asus Live G500TG
- Tool Supported: Sp Flash Tool
Download
How to Format a Single Partition of Asus Live G500TG:
1. The steps below explain how to format a single partition of an Asus Live G500TG using the SP flash tool.
2. Extract the content of the SP flash tool zip file and Launch SP flash tool.
3. Select the scatter file for your device by clicking choose besides the scatter-loading file’s dropdown bar.
4. In the windows that appear next, navigate to and select the Asus Live G500TG scatter file.
5. You should now be taken back to the SP flash tool window, click on the Format tab.
6. Tick the checkbox beside “Manual format flash”
7. Open windows explorer and navigate to the location of the scatter file you selected earlier on then open it using Notepad++
8. Scroll down the contents of the scatter file till you get to the partition you wish to format [in my case, I’m trying to format FRP partition]
9. Input the values of Linear_start addr and partition_size into SP flash tool then Click on Start
Code:Linear_start addr = Begin Address
partition_size = Format Length
11. Now you can boot up the Asus Live G500TG.
Disclaimer:
- Once the SP flash tool has detected your device, avoid disconnecting till the task is complete as this might cause the Asus Live G500TG to go dead.
- If you accidentally selected “Autoformat – Format all”, your device will go dead and you’ll need to flash full Asus Live G500TG stock ROM to revive the phone.
- Avoid using a random Asus Live G500TG scatter file (even though its for your chipset) in the sp flash tool. Just because a scatter file is for your chipset doesn’t mean it contains the same partition info. Formatting with a wrong scatter file could result in more problems than you initially intended to fix.
- SP flash tool was created by MediaTek Inc. so credits to them for the tool.