This time I will share a tutorial on how to flash Arian Space 80 Firmware. With computers in an easy and tested way on our devices. In this article, you will find Arian Space 80 Stock ROM. official download link flashing tutorial and flash tool. Download stock ROM from here. Flash it in your device and enjoy the native Android experience again.
Advertisement
Arian Space 80 Firmware Stock ROM – How To Flash Guide:
There are various reasons to flash (Firmware on Arian Space 80).
For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it. If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.
The Benefit Of Firmware:
Flash Stock ROM to unbrick your Arian Space 80
Update and downgrade
Unroot or fix bugs on the phone
To solve the lag or stutter
Fix software issues.
Revert to stock to get your warranty
Keeps rebooting issue
If your phone boots straight into recovery
Phone boots straight into its bootloader
Requirements:
Supported Phone: Arian Space 80
Charge your mobile: You may no less than a half charge.
Download the SPD Flash Tool and USB Drivers on your PC. Follow the below Guide to install the firmware using the Spd Flash tool.
+ Guide to Install Stock ROM using SPD Factory Tool:
1: Download and install SPreadtrum USB Driver on your computer.
2: Download the stock ROM (PAC) file.
3: Extract Spreadtrum Upgrade Tool on your computer.
4: Now open Spreadtrum Upgrade Tool .exe.
5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).
6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the ROM file. (having .pac extension)
7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.
8: Wait for 2 – 10 minutes, as the device is in the flashing process.
9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.
10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.
Congratulations, You have successfully installed Stock ROM using SPD Flash tool.
Disclaimer:
Please read and understand the Full Guide Before Flashing.
Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
Ensure charged you phone at 70–80%.
Bin Packet load Error When Flashing “Stock Firmware File”: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.
After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI.