The Magic Trackpad is an accessory that allows users to interact with their Mac in new and innovative ways. Though this technology has been around for decades, it may still encounter bugs or problems in certain situations. The “Apple Magic Trackpad not clicking” problem is the technical name for this issue. In this article, we will outline some possible solutions to this problem.

 Apple Magic Trackpad Not Clicking Issue

- Advertisement -

How to Fix Apple Magic Trackpad Not Clicking Issue

Here are some fixes for your Magic Trackpad not clicking issue. Therefore, let’s check them out:

Fix 1: Identify the issue

The Magic Trackpad does not respond if the user attempts to click on it while using a Mac. Using the Magic Trackpad is crucial for navigating through many parts of macOS, so this issue can become an annoyance if you frequently use the input device.

It’s possible that the Magic Trackpad is not clicking because of several different reasons. A low battery is usually to blame. It’s possible that the Magic Trackpad won’t register clicks if its battery has run out or lost charge. The Bluetooth icon in the menu bar can be used to check the battery status of a Magic Trackpad. If the Magic Trackpad’s battery level is low, it may be possible to resolve the issue by replacing or recharging the batteries.

It may be that dirt or debris has built up on the surface of your Magic Trackpad, preventing it from clicking properly.

Accumulated dust and dirt can interfere with the sensors in your Magic Trackpad, preventing you from detecting clicks. The best way to clean a computer trackpad is by using a soft, lint-free cloth and wiping the surface gently. It’s important to use only mild cleaning solutions on your keyboard, as more aggressive chemicals could damage the trackpad.

If the Magic Trackpad still doesn’t click after checking its battery and cleaning off any debris, you may need to reset it. To turn the Magic Trackpad off, hold down its power button for at least five seconds. Then release the button, and press it again to turn your trackpad back on. To ensure that the problem is truly gone, users should click again after resetting their Magic Trackpad.

Fix 2: Check The Battery

Because of the battery’s limited lifespan, Apple Magic Trackpads are prone to failure when their batteries run out. If your Magic Trackpad battery is low or dead, it may not be able to sense clicking on the surface. This type of check can help you determine whether there is a problem with the Magic Trackpad’s battery. Users can find out the battery status of their Magic Trackpad by opening the Bluetooth icon in their menu bar and selecting “Magic.”

Users can resolve this issue by replacing the battery or charging their Magic Trackpad if its batteries are low. It is possible to replace the battery if it has lost its charge. However, you must follow these steps:

  • You can turn off the Magic Trackpad by pressing and holding down the power button.
  • Flip the Magic Trackpad over and slide off the battery cover.
  • When old batteries are no longer able to hold a charge, they should be replaced with new ones.
  • Replace the battery cover by sliding it away from you.
  • Click on the Magic Trackpad and see if that fixes the problem.

If your Magic Trackpad does not respond to clicks even though the charge indicator shows that it has enough power, try plugging it into a Mac with a Lightning-to-USB cable. When connected to a Mac, the Magic Trackpad charges as if it were an Apple wireless keyboard. The battery icon in the menu bar will show its charged status.

Fix 3: Clean the Trackpad

If the Magic Trackpad is dirty or has debris on its surface, it won’t be able to detect your finger movements properly. In order to preserve the quality of your trackpad, you should regularly clean it.

To clean your Magic Trackpad, follow these steps:

  1. Make sure that the Magic Trackpad is not turned on or in use.
  2. It’s important to unplug a modem from its power source when moving it.
  3. A pre-moistened electronic cleaning wipe (or a soft, lint-free cloth) can also be used to clean.
  4. Do not press too hard on the trackpad surface or let any moisture enter its openings by gently wiping it. Using a lint-free cloth, dry the trackpad

If you want to clean the Magic Trackpad, avoid using harsh chemicals or cleaning solutions. The trackpad should not be rubbed with rough cloth or abrasive materials, which may scratch it.

Although users can blow the dirt and debris from a Magic Trackpad with compressed air if it has collected, they should not try to clean their trackpads. The procedure works well for removing dust from crevices of devices, where small particles have lodged.

Fix 4: Reset the Magic Trackpad

To reset an Apple Magic Trackpad, press and hold the Option key while clicking on the Smart button.

If you experience any problems with your Magic Trackpad, it can be reset by following these steps:

  1. You should turn off your Magic Trackpad.
  2. Press and hold the power button for about five seconds.
  3. Press and release the power button to turn it on.
  4. Activate the Magic Trackpad.

You can click the Magic Trackpad again once it has been reset to see if the issue is resolved. If the Magic Trackpad still doesn’t click after being reset, you may have to reconnect it with your Mac.

Here are the steps users can follow:

  1. In the top left corner of your screen, click on the Apple menu.
  2. Go to “System Preferences.”
  3. Select “Bluetooth.”
  4. The Magic Trackpad is listed among the devices that are connected to your computer.
  5. To remove a device, click the “Remove” button.
  6. Disable the Magic Trackpad.
  7. To reconnect the Magic Trackpad to your Mac, turn it on and then pair it with the computer.

Fix 5: Check The Settings

The Apple Magic Trackpad can stop clicking if you change its settings. Users can resolve the problem of their Magic Trackpad not clicking by checking settings and making changes if necessary.

There are a number of settings users can adjust in the Magic Trackpad’s preferences.

  1. Click the Apple icon in the top-left corner of your screen.
  2. Go to “System Preferences.”
  3. From the menu, select “Trackpad.”
  4. To enable tap-to-click, check the “Touchpad” section.
  5. Ensure that “Force Click and Haptic Feedback” is enabled by checking the “Force Click and Haptic Feedback” tab.
  6. Check the “Accessibility” tab for the “Mouse & Trackpad” settings, to confirm that the Magic Trackpad is working properly.

Checking the box next to “enable “Tap to Click,”” will enable this option if it is not already enabled. A user can click on the Magic Trackpad by tapping it, rather than physically pressing it.

If Force Click is not already enabled, you can do so by checking the box next to it. This will allow users to perform a “Force Click” action with a deeper click—and is useful for certain tasks.

Fix 6: Update the software

If you have not updated the software on your Magic Trackpad, it may be difficult to make it click.

There are several updates available for your Mac. Some of these can resolve bugs and make the software run more smoothly. To check for updates, go to the Software Update pane in System Preferences.


Several possible solutions are available for users who find that their Apple Magic Trackpad is not clicking. First, make sure the battery is charged; then clean the trackpad if necessary. If you are still having problems with the Magic Trackpad, you should try restarting it and checking its settings. If that does not solve your problem, update its software.

Always had a strong interest in the Android operating system. Experience with Git and self-hosted WordPress blogs led him to the understanding that an online presence was the logical next step for his business. It's about uniqueness and individuality!


Please enter your comment!
Please enter your name here