Aoson S8 Pro Firmware Flash File [Stock ROM]

Aoson S8 Pro Firmware Flash File Stock ROM


If you’re looking for the Aoson S8 Pro Firmware you need to flash, it can sometimes be difficult to locate online. For Aoson S8 Pro.

In this Article/Tutorial about Unbrick Aoson S8 Pro. and download flash files tested and working file. I have explained the method which is used by People or the Repairing Shops. I hope This Tutorial Will Help You To Unbrick Aoson S8 Pro Mediatek Based Devices.

Aoson S8 Pro Firmware Flash File [Stock ROM]

This article contains the Aoson S8 Pro Firmware Flash File. That will allow you to recover your Aoson S8 Pro mobile into its initial Factory state.

Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

We will use Sp Flash Tool to unbrick the Aoson S8 Pro as we use for Kult Impulse KT05. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Aoson S8 Pro.

[quads id=2]

The Advantages Aoson S8 Pro Firmware:

  • Flash Stock To Unbrick your Aoson S8 Pro
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Aoson S8 Pro
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Aoson S8 Pro
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Aoson S8 Pro Firmware Details:

  • Gapps File: Included
  • Device Supported: Aoson S8 Pro
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT8735
  • Os: Android 6.0 Marshmallow


[quads id=2]

Pre-requirements to Install Aoson S8 Pro Firmware:

  • Supported Phone: Aoson S8 Pro
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Aoson S8 Pro Flashing Tool And Drivers:


  • Please read and understand the Full Guide Before Flashing Aoson S8 Pro Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Aoson S8 Pro Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Aoson S8 Pro Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in the SP flash tool.

Step 11: Close the SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy it.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Aoson S8 Pro Firmware Flashing With Sp Flash Tool.

- Advertisement -

Latest Articles

- Advertisment -