Stock Firmware

AlldoCube M5S Firmware Flash File [T1006S ROM]

AlldoCube M5S Firmware Flash File T1006S ROM

This article contains the AlldoCube M5S Firmware Flash File. That will allow you to recover your AlldoCube M5S mobile into its initial Factory state.

At some point, while using AlldoCube M5S Hyphone, you’ll probably encounter a situation in which you need to flash AlldoCube M5S Hyphone firmware. You might need an AlldoCube M5S Hyphone stock ROM how do you make sure the flashing process goes off without a hitch?

Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

AlldoCube M5S Firmware Flash File [T1006S ROM]:

We will use Sp Flash Tool to unbrick the AlldoCube M5S as we use for Symphony V48. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your AlldoCube M5S.

[quads id=2]

The Advantages AlldoCube M5S Firmware:

  • Flash Stock To Unbrick your AlldoCube M5S
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade AlldoCube M5S
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on AlldoCube M5S
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

AlldoCube M5S Firmware Details:

  • Gapps File: Included
  • Device Supported: AlldoCube M5S
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6797
  • Os: Android 8.0 Oreo


[quads id=2]

Pre-requirements to Install AlldoCube M5S Firmware:

  • Supported Phone: AlldoCube M5S
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

AlldoCube M5S Flashing Tool And Drivers:


  • Please read and understand the Full Guide Before Flashing AlldoCube M5S Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install AlldoCube M5S Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download AlldoCube M5S Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When SP flash tool open, go to download button in SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in the SP flash tool.

Step 11: Close the SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy it.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction AlldoCube M5S Firmware Flashing With Sp Flash Tool.

Back to top button