How To Flash Alcatel Pixi 4 4034D Firmware Stock ROM

 

I am flashing stock firmware on Alcatel Pixi 4 4034D using the flash tool. Step by step guide showing how to flash Alcatel Pixi 4 4034D Stock ROM File with Sp flash tool.

 

Why would you want to flash Firmware on your Alcatel Pixi 4 4034D?

There are various reasons to flash Firmware on Alcatel Pixi 4 4034D. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.  If you’re going to reset your phone hard and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are.

The Benefit Of Alcatel Pixi 4 4034D Firmware:

• Flash Stock ROM To Unbrick
• Update and downgrade
• Unroot or fix bugs on the phone
• To solve the lag or stutter
• Fix software issues.
• Revert to stock to get your warranty
• Keeps rebooting issue
• if your phone boots straight into recovery
• Phone boots straight into its bootloader

Alcatel Pixi 4 4034D Firmware Details:

• Gapps File: Included
• Device Supported: Alcatel Pixi 4 4034D
• Tool Supported: SP Flash Tool
• Processor: MediaTek MT6580
• OS: Android

Download Alcatel Pixi 4 4034D Flash File:

 Alcatel_Pixi_4_4034D_MT6580.zip

Requirements to flash Alcatel Pixi 4 4034D Stock ROM:

• Supported Phone: Alcatel Pixi 4 4034D Stock ROM
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

1. Take Alcatel Pixi 4 4034D Firmware Backup

Before going to install Alcatel Pixi 4 4034D stock ROM, you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

How To Backup Android Phone Before Flashing Stock Firmware

---

2. Download Alcatel Pixi 4 4034D Flash Tool And Drivers:

A.  Download and install Alcatel Pixi 4 4034D Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as Alcatel Pixi 4 4034D Flash Tool this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Alcatel Pixi 4 4034D.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Alcatel Pixi 4 4034D.

Instructions to Flash Alcatel Pixi 4 4034D Stock ROM:

1. Download Alcatel Pixi 4 4034D flash file zip file is given above and extracts it in your computer.

2. Download Alcatel Pixi 4 4034D USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Alcatel Pixi 4 4034D smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover the “Flash_tool.exe” file in it. Launch it.

5. As soon as SP Flash tool is launch, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference, see the picture given below.

8. Now click on on the “Download” button to start the flashing process.

9. Next, join your Alcatel Pixi 4 4034D Android device to your computer using the USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Alcatel Pixi 4 4034D Android device.

Follow Detailed Instruction Alcatel Pixi 4 4034D Firmware Flashing With Sp Flash Tool.

Disclaimer:

• Please read and understand the Full Guide Before Flashing Alcatel Pixi 4 4034D.
• Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
• Before flashing, Stock ROM Alcatel Pixi 4 4034D must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.