How To Flash Acer Liquid Z6 Plus T11 Stock Firmware ROM File

How To Flash Acer Liquid Z6 Plus T11 Stcok Firmware ROM File

Today we discuss a new mobile phone name Acer Liquid Z6 Plus T11 and guide you to install stock firmware file on it. The Acer Liquid Z6 Plus is powered by 1.3GHz octa-core processor and it comes with 3GB of RAM. The phone packs 32GB of internal storage that can be expanded up to 128GB via a microSD card. As far as the cameras are concerned, the Acer Liquid Z6 Plus packs a 13-megapixel primary camera on the rear and a 5-megapixel front shooter for selfies. The Acer Liquid Z6 Plus runs Android 6.0 and is powered by a 4080mAh nonremovable battery. It measures 153.60 x 75.40 x 8.50 (height x width x thickness) and weighs 168.00 grams.

In case you’ve bricked your Phone or simply Wish to clean install the Stock ROM on Acer Liquid Z6 Plus T11 then you definitely are in the best place. Acer Liquid Z6 Plus T11 is based on MTK CPU. To install Stock firmware on Acer Liquid Z6 Plus T11 Media Tek powered device, you require Flashing Tool known as Sp Flash Tool, Formally also called Smart Phone Flashing Tool. Download the Acer Liquid Z6 Plus T11 Stock Firmware, drivers, and SP flash tool, then you can carry out our instructions on setting up the firmware on Acer Liquid Z6 Plus T11.

How To Flash Acer Liquid Z6 Plus T11 Stock Firmware ROM File

We will use Sp Flash Tool to unbrick the Acer Liquid Z6 Plus T11. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Acer Liquid Z6 Plus T11. Sp Flash Tool and it is used to Manually Upgrade or flash MTK Android Smartphone or tablet. Sp Flash Tool is used to flash only Stock Rom or Custom Firmware on Media Tek Devices which comes in .zip Format. To use Smartphone Flashing tool with Acer Liquid Z6 Plus T11 you first need to properly install the latest Vcom USB Drivers for Acer Liquid Z6 Plus T11.

The Benefit Acer Liquid Z6 Plus T11 Of Stock ROM:

The Acer Liquid Z6 Plus T11 Stock Firmware shared on this page is Officially released by the company and helps you to recover Acer Liquid Z6 Plus T11 Phone if you ever got software error, update error, hanging, Unknown Baseband, IMEI Null and dead issue on Acer Liquid Z6 Plus T11.

Acer Liquid Z6 Plus T11 Firmware Details:

  • Gapps File: Included
  • Device Supported: Acer Liquid Z6 Plus T11
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –
  • Os: Android 8.1.0 Oreo
 Download File   Description

Related Posts:

Pre-requirements to Install Stock Firmware on Acer Liquid Z6 Plus T11:

  • Supported Phone: Acer Liquid Z6 Plus T11
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Flashing Tool And Drivers:


  • Please Read and understand the Full Guide Before Flashing Acer Liquid Z6 Plus T11 Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Firmware on Acer Liquid Z6 Plus T11:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Stock Firmware Flash File ROM for your phone from below.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When SP flash tool open, go to download button in SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in SP flash tool.

Step 11: Close SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Flashing With Sp Flash Tool.

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Do NOT follow this link or you will be banned from the site!
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for