Home Stock Firmware Samsung Galaxy A8 2018 SM-A530N U3 Firmware – Full Repair

Galaxy A8 2018 SM-A530N U3 Firmware – Full Repair

A8 2018 SM-A530N Binary 3 Firmware

The specific Galaxy A8 2018 SM-A530N U3 Firmware Download Package has a Stock ROM of Galaxy A8 2018 SM-A530N U3. This helps bypass the FRP lock and revert from the root and custom ROM.

Galaxy A8 2018 SM-A530N Binary 3 Firmware – Full Repair

There are various reasons to flash “Stock Firmware on Galaxy A8 2018 SM-A530N U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy A8 2018 SM-A530N U3 Stock ROM Details:

AP VERSION CSC VERSION code Type OS Size link
A530NKSU3CSJ2 A530NOKR3CSJ2 KTC FULL OS9 3,2G DOWNLOAD
A530NKSU3CSG1 A530NOKR3CSG1 KTC FULL OS9 3,1G DOWNLOAD
A530NKSU3CSE3 A530NOKR3CSE3 LUC FULL OS9 3,0G DOWNLOAD
A530NKSU3CSD2 A530NOKR3CSD2 SKC FULL OS9 3,0G DOWNLOAD
A530NKSU3BRJ2 A530NOKR3BRJ2 KTC FULL 8.0 2,9G DOWNLOAD
[quads id=2]

How To Install Galaxy A8 2018 SM-A530N U3 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.

2: Download and extract the Galaxy A8 2018 SM-A530N U3 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy A8 2018 SM-A530N U3 finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A8 2018 SM-A530N U3 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.

Exit mobile version