A8 2018 SM-A530F Binary 13 Firmware

The specific Galaxy A8 2018 SM-A530F Binary 13 Firmware Download Package comes with a Stock ROM of Galaxy A8 2018 SM-A530F U13 Security Patch Level 2020-07-01 (1 July 2020). This helps you to bypass FRP lock and revert form root and custom ROM.

Galaxy A8 2018 SM-A530F U13 Android 9 Pie – A530FXXSDCTG1

There are various reasons to flash “Stock Firmware on Galaxy A8 2018 SM-A530F U13“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to hard reset your phone and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Pre-requirements:

Galaxy A8 2018 SM-A530F U13 Stock ROM Details:

Model SM-A530F Binary 13 UD, SD, Bit 13
Region / Country Brazil
Language Multi-Language
Android version 9 Pie
Operator Clean ZTO (without logo, operator apps)
PDA A530FXXSDCTG1
CSC A530FOXMDCTG2
Product code ZTO
Build Date 30 Jun 2020
Security Patch Level 2020-07-01 (1 July 2020)
Size 3.4 GB
Download 4File Google Drive Android File Host

How To Install Galaxy A8 2018 SM-A530F U13 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the Galaxy A8 2018 SM-A530F U13 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click on the PDA button, and select the Firmware.tar file.

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

The once Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot, but don’t be alarmed.

When your Galaxy A8 2018 SM-A530F U13 finally boots up, you should now be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

  • Please read and understand the Full Guide before flashing “Galaxy A8 2018 SM-A530F U13 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Write A Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.