The specific Galaxy A7 2018 SM-A750C U1 Firmware Download Package has a Stock ROM of Galaxy A7 2018 SM-A750C U1. This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A7 2018 SM-A750C U1
There are various reasons to flash “Stock Firmware on Galaxy A7 2018 SM-A750C U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy A7 2018 SM-A750C U1
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A7 2018 SM-A750C U1 Stock ROM Details:
AP VERSION | CSC VERSION | code | Type | OS | Size | google link |
A750CONU 1 ASI2 | A750CRKT1ASI2 | RKT | FULL | OS9 | 2.8G | DOWNLOAD |
A750CONU 1 ASI1 | A750CRKT1ASI1 | RKT | FULL | OS9 | 2.8G | DOWNLOAD |
How To Install Galaxy A7 2018 SM-A750C U1 Stock Firmware:
How To Flash Samsung Stock Firmware With ODIN
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy A7 2018 SM-A750C U1 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you can see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy A7 2018 SM-A750C finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A7 2018 SM-A750C U1 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.