Galaxy A01 Core SM-A013M U1 Firmware (Full Repair)

A01 Core SM-A013M Binary 1 Firmware

The specific A01 Core SM-A013M Binary 1 Firmware Download Package has a Stock ROM of A01 Core SM-A013M U1 Security Patch Level 2020-07-01 (1 July 2020). This helps bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy A01 Core SM-A013M U1 Android 10 Q Chile CHO – A013MUBU1ATG3

There are various reasons to flash “Stock Firmware on Galaxy A01 Core SM-A013M U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy A01 Core SM-A013M U1 Stock ROM Details:

SM-A013M U1 Chile CHO – A013MUBU1ATG3:

Model SM-A013M Binary 1 U1, S1, Bit 1
Region / Country Chile
Language Multi-Language
Android version Android 10 Q
Operator Clean CHO (without logo, operator apps)
PDA A013MUBU1ATG3
CSC A013MOWO1ATG1
Product code CHO
Build Date 2020-06-30
Security Patch Level 2020-07-01 (1 July 2020)
Size 1.3 GB
[quads id=2]
1 July 2020 Security Patch Google Drive Android File Host

Samsung Galaxy A01 SM-A013 Full Repair Firmware 4 Files

A013GXXU 1 ATG7_A013GOJM1ATG7_XSG_10.0.zip AFH OneDrive GDrive2

How To Install Galaxy A01 Core SM-A013M U1 Stock Firmware:

1: Install the Samsung USB Driver on your pc.

2: Download and extract the Galaxy A01 Core SM-A013M U1 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy A01 Core SM-A013M finally boots up, you should be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A01 Core SM-A013M U1 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.