Home Stock Firmware Galaxy A01 Core SM-A013M U1 Firmware (Full Repair)

Galaxy A01 Core SM-A013M U1 Firmware (Full Repair)

A01 Core SM-A013M Binary 1 Firmware

The specific A01 Core SM-A013M Binary 1 Firmware Download Package has a Stock ROM of A01 Core SM-A013M U1 Security Patch Level 2020-07-01 (1 July 2020). This helps bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy A01 Core SM-A013M U1 Android 10 Q Chile CHO – A013MUBU1ATG3

There are various reasons to flash “Stock Firmware on Galaxy A01 Core SM-A013M U1“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to reset your phone hard and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Pre-requirements:

Galaxy A01 Core SM-A013M U1 Stock ROM Details:

SM-A013M U1 Chile CHO – A013MUBU1ATG3:

Model SM-A013M Binary 1 U1, S1, Bit 1
Region / Country Chile
Language Multi-Language
Android version Android 10 Q
Operator Clean CHO (without logo, operator apps)
PDA A013MUBU1ATG3
CSC A013MOWO1ATG1
Product code CHO
Build Date 2020-06-30
Security Patch Level 2020-07-01 (1 July 2020)
Size 1.3 GB
Advertisements
1 July 2020 Security Patch Google Drive Android File Host

Samsung Galaxy A01 SM-A013 Full Repair Firmware 4 Files

A013GXXU 1 ATG7_A013GOJM1ATG7_XSG_10.0.zip AFH OneDrive GDrive2

How To Install Galaxy A01 Core SM-A013M U1 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

Advertisements

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, Skip this Step.

2: Download and extract the [highlight color=”yellow”]Galaxy A01 Core SM-A013M U1 Firmware[/highlight] files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you must boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: You can see a Warning Yellow Triangle Sign in the Download mode. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then, connect your Smartphone to the computer.

7: Once you have connected the smartphone to the computer, Odin will automatically recognize the device and show the “Added” message in the lower left panel.

Advertisements

8: Once Odin detects your device, click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you can see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot but don’t be alarmed.

When your Galaxy A01 Core SM-A013M finally boots up, you should be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Advertisements

Disclaimer:

  • Please read and understand the Full Guide before flashing “Galaxy A01 Core SM-A013M U1 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.