Vitu
Are you in search of the Vitu Mars 1 Firmware File? If sure of your reply, you might be on a suitable web page. We’ve given the direct link to download Vitu Mars 1 firmware.

Vitu Mars 1 Firmware Flash File [Stock ROM]

There are various reasons to flash (Firmware on Vitu Mars 1).

Advertisement

For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.  If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of Firmware:

  • Flash Stock ROM to unbrick your Vitu Mars 1
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader
[quads id=2]

Requirements To Flash Vitu Mars 1 Stock ROM:

  • Charge your mobile: Your phone may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

1. Take Vitu Mars 1 Full Backup

Before going to install Vitu Mars 1 stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

2. Download Vitu Mars 1 Flash Tool And Drivers:

A.  Download and install Vitu Mars 1 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Spreadtrum flash tool for as Vitu Mars 1 Flash Tool because of this tool is very efficient and support all kind of SPD phones.

Instructions to Flash Vitu Mars 1 Stock ROM:

1: Download and install SPreadtrum USB Driver on your computer.

2: Download Vitu_Mars_1_SP7731CEB_16122018_SPD (PAC) file.

3: Extract Spreadtrum Upgrade Tool on your computer.

4: Now open Spreadtrum Upgrade Tool .exe.

5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).

6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the Vitu Mars 1 ROM file. (having .pac extension)

7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.

8: Wait for 2 – 10 minutes, as the device is in the flashing process.

9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.

10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, You have successfully installed Vitu Mars 1 Stock ROM using SPD Flash tool.

Disclaimer:

  • Read and understand the Full Guide before flashing.”Vitu Mars 1 Firmware”.
  • Use these instructions at your own risk.
  • Before flashing, Stock ROM on Vitu Mars 1 must have a 70–80% charge.

Bin Packet load Error When Flashing “Vitu Mars 1 Stock Firmware File”: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing Vitu Mars 1 Stock Firmware File: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Vitu Mars 1 Firmware Details:

Disadvantage

Gapps: Included No Root
Device Supported: Vitu Mars 1 No Twrp And Nand Backup
Tool Supported: SPD Flash Tool No Customization And Over cloaking
Soc: Spreadtrum No ADB Ad Block
Os: Android 6.0 Pre-installed OEM apps
[quads id=2]
Get Link