Home / Android / Unbrick Wiko Fever Unbrick With Sp Flash Tool

Unbrick Wiko Fever Unbrick With Sp Flash Tool

Unbrick Wiko Fever Unbrick With Sp Flash Tool

You Can Use The Below Method For Upgrade Wiko Fever  /And If You Want To Hard Reset It By Flashing The Stock Rom/ In Case If You Are Using Any Custom Rom And Want Back To Stock Rom And Official Firmware Or Facing The Boot loop Problem. This Method Is Also Useful For Sudden Death/Bricked/Not Power And Also After Flashing The Stock Rom imei Null or Unknown Baseband Problems Can Be Solve.

Download Files To Flash Wiko Fever  Stock Rom :-

  1. SP Flash tool – Download it here
  2. Wiko  Fever  Adb Drivers here
  3. Wiko  Fever Slim Flash Files. (Wiko_Fever_V18)
  4. Laptop or Desktop Computer
  5. USB Cable for communicating between PC and Smartphones.

Flash a Backup or ROM with SP Flash Tool Disclaimer :-

Don’t flash another preloader and DSP_BL blocks!
It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

1. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (ignore this step 1, for phones with built in battery).
2. Now connect or reconnect the USB cable to the phone with the PC while the phone is still off, Windows should pop up and begin to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB Drivers correctly in Windows. After they successfully installed, disconnect the USB cable again.
3. Extract SP Flash tool on your computer and launch it.

4. Open the folder you extract it to and locate flash_tool, double click on it to open.

5. Once it is launched, hit the Scatter-loading button

6. Locate the scatter file in the backup or Rom of the phone that you downloaded. It’s usually a text file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable).

7. Hit the “Download’ button in SP Flash Tool to begin the flashing process

8. Connect your Smartphone to the computer with a USB without battery, if possible to remove. Press, Vol Down or Up so that the computer can easily detect the phone.

9. Once the Flashing is complete you will see a green circle confirming… With Download OK.

10. Close the SP Flash Tool and disconnect your phone from the computer. Congratulation, your Smartphone is now flashed with the new Stock Rom you downloaded.

If your phone bootloops, remove battery and boot into recovery mode. Factory reset the phone.

Stay Glued for the updates about different Smartphones Latest Stock ROMs with downloading links and the instruction on how to get it done.

    wiko fever 4s spflashtool files

Leave a Reply

Your email address will not be published. Required fields are marked *