Ulefone U7 Tablet MT6592 4.4 Official Firmware

Ulefone U7 Tablet MT6592 4.4 Official Firmware

[box type=”info” align=”” class=”” width=””]You Can Use The Below Method For Upgrade Ulefone U7 Tablet MT6592/And If You Want To Hard Reset It By Flashing The Stock Rom/ In Case If You Are Using Any Custom Rom And Want Back To Stock Rom And Official Firmware Or Facing The Boot loop Problem. This Method Is Also Useful For Sudden Death/Bricked/Not Power And Also After Flashing The Stock Rom imei Null or Unknown Baseband Problems Can Be Solve.[/box]

[box type=”download” align=”” class=”” width=””]

Download SP Flash Tool Newest SP Flash Tool is very useful utility for fixing soft brick or bootloop cases especially for the Media Tek devices. You could flash Stock or Custom ROMs of your choice.

Download MediaTek USB VCOM drivers

Windows 10/Pro users: READ: How To Install MTK VCOM Driver On WINDOWS 10 (32 & 64 bits)

Download the Stock Rom For Ulefone U7 Tablet MT6592 :-

UleFone U7 MT6592 2014.07.02 4.4.2.zip Stock Rom Download

[/box]

[box type=”note” align=”” class=”” width=””]

IMPORTANT :-
Next you need to install drivers in order to connect your device properly, just extract Driver_Auto_Installer_v1.1236.00.zip, and double-click “Install.bat”, and it will automatically install the necessary drivers, and you need to allow permissions for these drivers to be installed.
1

2

3

[/box]

Ulefone U7 Tablet MT6592 Stock Rom Flashing With SP Flash Tool :-

[box type=”shadow” align=”” class=”” width=””]

Check your Phone battery, you should have at least more than 50% and switch off your phone.
Unzip both SP Flash Toolv5.1532.zip and Stock rom.zip
Install and launch SP Flash Tool as shown below :-

214829didxo68eoojjill1-jpg-thumb

Next click on the “Scatter loading” button and locate the scatter text from the unzipped ROM earlier, as shown below :-

214842lgnyk722wwsymyoy-jpg-thumb

Now click the “Download” button and connect your device (in off state) to the PC or Laptop via USB Cable and immediately press Volume Up button momentarily, and your device will be detected accordingly and initiating the flashing process, as shown below :-

ee

It will complete the flash process in a minute or so, and when it is complete and successful, you see the yellow full bar and a big check mark as shown below :-

z-9-wm[/box]

[box type=”success” align=”” class=”” width=””]

Now, you can switch on your device.[/box]

Share If You Like My Work
    ulefone tablet