Galaxy A13 SM-A137F U3 Firmware – Android 13 T

If you own a Galaxy A13 SM-A137F smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy A13 SM-A137F U3 With 2023-09-01 (September 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung Galaxy A13 SM-A137F Binary 3 Android 13 Israel ILO A137FXXS3CWI3

Benefits of Updating Firmware

There are various reasons to flash “Stock Firmware on Galaxy A13 SM-A137F U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

• Fix boot loop issue
• Update and Downgrade
• Unroot or Fix Bugs
• To solve the lag or stutter
• Fix software issues.
• Return to stock for warranty coverage.

Preparation:

• Supported Phone: Galaxy A13 SM-A137F U3
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.
• Backup Android Phone
• Download and install the Samsung USB Driver
• Download Odin’s Latest version

How To Install Galaxy A13 SM-A137F U3 Stock Firmware:

Download Galaxy A13 SM-A137F U3 Latest Firmware:

SM-A137F U3 Israel ILO A137FXXS3CWI3:

Model	SM-A137F Binary 3 U3, S3, Bit 3
Region / Country	Israel
Language	Multi-Language
Android OS Version	Android 13 T
Operator	Clean ILO (without logo, operator apps)
AP/PDA	A137FXXS3CWI3
CSC	A137FOJM3CWE1
Modem CP Version / Baseband	A137FXXU3CWE1
Product code	ILO
Build / Release Date / Launch	2023-09-27
Security Patch Level	2023-09-01 (September 1, 2023)
Size	3.6GB

[quads id=2]

Download

Google Drive

1: Download and Install the Samsung USB Driver on your computer.

2: Download and extract the  Galaxy A13 SM-A137F U3 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once the Firmware process is completed you can see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy A13 SM-A137F U3 finally boots up, you should be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

• Read and understand the Full Guide before flashing.”Galaxy A13 SM-A137F U3 Firmware“.
• Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
• Phone must have a 70–80% charge.