Get the newest Galaxy A04e SM-A042M/DS Firmware A042MUBU6DXA2 Package with the February 1, 2024 Security Patch Level. This update is a must for bypassing the FRP lock. going back from root access, and switching from custom ROMs to the original firmware. Stay secure and keep your device up-to-date with this important download.
Samsung Galaxy A04e SM-A042M Binary 6 Android 14 Argentina ARO A042MUBU6DXA2
SM-A042M U6 Argentina ARO A042MUBU6DXA2:
Model / Device | SM-A042M/DS Binary 6 U6, S6, Bit 6 |
Region / Country | Argentina |
Language | Multi Language |
Android Version | Android 14 U |
Operator / Carrier | Clean ARO (without logo, operator apps) |
AP/PDA | A042MUBU6DXA2 |
CSC | A042MOWO6DXA2 |
Modem CP Version / Baseband | A042MUBU6DXA2 |
Product code | RIM |
Build / Release Date | 2024-02-21 |
Security Patch Level | 2024-01-01 (January 1, 2024) |
Size | 4.8GB |
Download | Google Drive |
Downgrade Firmware For Galaxy A04e SM-A042M/DS:
- Galaxy A04e SM-A042M/DS U1 FirmwareÂ
- Galaxy A04e SM-A042M/DS U2 Firmware
- Galaxy A04e SM-A042M/DS U3 Firmware
- Galaxy A04e SM-A042M/DS U4 Firmware
- Galaxy A04e SM-A042M/DS U5 Firmware
Pre-requirements:
- Compatible Device: Galaxy A04e SM-A042M/DS
- Charging: Charge your mobile to at least 50%.
- Computer: A PC or laptop is required for installation.
- Back Up Your Android Phone: Back up your device before starting. Instructions here.
- Samsung USB Driver: Needed for connectivity. Download from Samsung’s developer site.
- Downloading Odin: Download the latest version of Odin for installation here.
How To Install Stock Firmware:
- Download the Galaxy A04e SM-A042M/DS Binary 6Â Firmware files, then extract them on your computer.
- Turn off your smartphone completely.
- Press and hold the Volume Down, Home, and Power buttons simultaneously for 5-8 seconds until download mode is active. For a new phone, use this guide.
- In Download Mode, a warning sign with a yellow triangle will appear. Press the Volume Up button to continue.
- Open Odin on your PC and connect your smartphone via USB.
- Odin will display “Added” in the lower-left corner once the device is successfully connected.
- Select the Firmware.tar file by clicking on the PDA button in Odin.
- Press the Start button in Odin to initiate the firmware flashing process.
- The flashing process should be completed within 30-50 seconds.
To verify the installed firmware, navigate to Settings, select About Phone, then Software Information. Locate the firmware number listed as “Baseband version.”
- Advertisement -