Please disable any ad-blocker you are using in your browser.

Home / How To / [Stock Rom] Vivo X5 Pro Android 5.0 Lollipop

[Stock Rom] Vivo X5 Pro Android 5.0 Lollipop

Vivo X5 Pro Android 5.0 Lollipop

How To Flash Vivo X5 Pro With QFIL

DOWNLOADS For Vivo X5 Pro Flashing :-

To use QPST, some drivers need to be installed on your Computer.

1. Download and install Qualcomm driver from link. While installing driver avoid using cable for successful installation.

2. When Drivers installed, Attach Phone to PC via USB cable.

3. While connecting to PC, phone should be switched off and press volume up & down as boot key.

4. If it Create Qualcomm  HS-USB QDLoader 9008 port in device manager , then driver has been successfully installed.

FLASHING Lenovo K6 Power K33 MBN FIRMWARE USING QPST

Once driver installation is complete, follow the instructions below to flash the MBN firmware file to your Qualcomm device.

1. Download the QPST tool & driver.

2. Make sure your device is charged to at least 30%.

3. Run QFIL tool.

4. Now Browse under the Programmer path to Chose MBN File.

MBN File Format:

5. As soon as the MBN file is selected, Select Build will automatically select the Update or Stock ROM.

6. Next Go To  Load XML, select rawprogram_unsparse_without_qcn.xml and Select Patch0.xml

Load XML comes with two option:

  • rawprogram_unsparse_without_qcn.xml : On choosing this file, data will not be lost.
  • rawprogram_unsparse.xml : Will lose RF Calibration data, IMEI and WiFi/Bluetooth Address.

 

7. Turn off the Phone and Attach  it to PC by pressing Vol up & down button.

8. Click on Select Port and choose the port.

9. Click on Download to start flashing.

10. Disconnect device from USB cable once Finish Download appears.

That’s all!

    android 5 0 for vivo x5, rom vivo x5 lolipop

Leave a Reply

Your email address will not be published. Required fields are marked *

*