S4 I9500 Clone Firmware File

The specific Samsung Galaxy S4 I9500 Clone Firmware comes with a Stock ROM of Samsung Galaxy S4 I9500 Clone. This helps you to bypass the FRP lock and revert from root and custom ROM.

Why would you want to flash Firmware on your Samsung Galaxy S4 I9500 Clone?

There are various reasons to flash (Firmware on Samsung Galaxy S4 I9500 Clone).

For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it. Suppose you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

- Advertisement -

The Benefit Of Stock Firmware:

  • Flash Stock ROM to unbrick your Samsung Galaxy S4 I9500 Clone
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader

Samsung Galaxy S4 I9500 Clone Firmware Details:

  • Gapps: Included
  • Device Supported: Samsung Galaxy S4 I9500 Clone
  • Tool Supported: SP Flash Tool
  • Soc: MediaTek
  • Os:

Download:

[quads id=2]

Requirements To Flash Samsung Galaxy S4 I9500 Clone Stock ROM:

  • Charge your mobile: Your phone may no less than half a charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

 Take Samsung Galaxy S4 I9500 Clone Full Backup

Before going to install Samsung Galaxy S4 I9500 Clone stock ROM, you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.
Most smartphones back up automatically in the background in case of incidents. To ensure a complete transition to your new device, a full backup is necessary.

Download Samsung Galaxy S4 I9500 Clone Flash Tool And Drivers:

A.  Download and install Samsung Galaxy S4 I9500 Clone Drivers—the necessary communication between your device and PC.

These drivers are mainly for the devices powered by the MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for Samsung Galaxy S4 I9500 Clone Flash Tool because this tool is very efficient and support all kind of MTK phones.

Instructions to Flash Samsung Galaxy S4 I9500 Clone Stock ROM:

1. First of all, Download the ‘Samsung Galaxy S4 I9500 Clone flash file zip‘ given above, and extract it on your computer’s desktop. Also, download and extract the sp flash tool.

2. Then download the Samsung Galaxy S4 I9500 Clone USB driver and set it up on your computer. In case you have already installed the USB driver on your computer, skip this step.

3. Next, switch off your smartphone and take away the battery (if it is removable).

4. Now go to the sp flash tool extract folder and launch it.

5. As soon as the SP Flash tool is launched, click on the Download tab.

6. Now, click on the Scatter-loading button within the download tab.

7. Choose the scatter file from the Samsung Galaxy S4 I9500 Clone firmware extract folder.

8. Now click on the Download button to start the flashing process.

9. Next, connect your phone to your computer using the USB cable (without battery – if the battery is removable) and press the volume up or volume down button at the same time.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the Download OK green ring in SP Flash Tool.

Now, close the SP Flash tool and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM on your Samsung Galaxy S4 I9500 Clone.

Follow Detailed Instruction To Flash Samsung Galaxy S4 I9500 Clone Firmware With Sp Flash Tool.

Disclaimer:

  • Read and understand the Full Guide before flashing.”Samsung Galaxy S4 I9500 Clone Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of information in this guide.
  • Before flashing, Stock ROM on Samsung Galaxy S4 I9500 Clone must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of MTK phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.