The specific Galaxy Grand Prime Plus SM-G532M Firmware Download Package comes with a Stock ROM of Galaxy Grand Prime Plus SM-G532M. This helps you to bypass the FRP lock and revert from root and custom ROM.
Samsung Galaxy Grand Prime Plus SM-G532M Firmware [Stock ROM]
There are various reasons to flash “Stock Firmware on Galaxy Grand Prime Plus SM-G532M“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements to Install Galaxy Grand Prime Plus SM-G532M Stock ROM
Before going to install stock ROM, you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing or updating the firmware.
Most smartphones automatically make a backup in the background in case something happens. But to make sure you take everything to your new device, you need a full backup.
Most smartphones back up automatically in the background in case of incidents. To ensure a complete transition to your new device, a full backup is necessary.
How To Install Galaxy Grand Prime Plus SM-G532M Firmware Update
1: Download and Install Samsung USB Driver on your computer.
2: Download and extract the Galaxy Grand Prime Plus SM-G532M Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy Grand Prime Plus SM-G532M finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy Grand Prime Plus SM-G532M Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of information in this guide.
- Phone must have a 70–80% charge.
Galaxy Grand Prime Plus SM-G532M Stock ROM Details:
| File Name: | SM-G532M_G532MUMU1APK4_G532MUUB1APK4_6.0.1_Trinidad_and_Tobago.zip |
| Country: | Trinidad and Tobago |
| File Size: | 1 GB |
| Android Version: | 6.0.1 |
| Get Link |
