Samsung Galaxy S3 SCH-I535 Firmware [Stock ROM]

Samsung Galaxy S3 SCH-I535 Firmware

The specific Samsung Galaxy S3 SCH-I535 Firmware Download Package comes with a Stock ROM of Samsung Galaxy S3 SCH-I535. This helps you to bypass FRP lock and revert form root and custom ROM.

Samsung Galaxy S3 SCH-I535 Firmware [Stock ROM]

There are various reasons to flash “Stock Firmware on Samsung Galaxy S3 SCH-I535“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Pre-requirements to Install Samsung Galaxy S3 SCH-I535 Stock ROM

How To Backup Android Phone Before Flashing Stock Firmware

How To Install Samsung Galaxy S3 SCH-I535 Firmware Update

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the Samsung Galaxy S3 SCH-I535 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

The once Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. It may take some time for your device to reboot, but don’t be alarmed.

When your Samsung Galaxy S3 SCH-I535 finally boots up, you should now be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Samsung Galaxy S3 SCH-I535 Firmware.
  • Use these instructions at your own risk.
  • Phone must have a 70–80% charge.

Samsung Galaxy S3 SCH-I535 Stock ROM Details:

File Name: I535VRBMF1_I535VZWBMF1_VZW.zip
Country: USA (Verizon)
File Size: 799 MB
Android Version: 4.1.2
[quads id=2]
Get Link

 

File Name: I535VRUDNE1_I535VZWDNE1_VZW.zip
Country: USA (Verizon)
File Size: 974 MB
Android Version: 4.4.2
[quads id=2]
Get Link