360 N7 Pro
Welcome To all in one thread for 360 N7 Pro in this post I will share all kinds of 360 N7 Pro Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your 360 N7 Pro software upgrade.

How To Flash 360 N7 Pro Firmware Stock ROM

“360 N7 Pro Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is 360 N7 Pro Stock Rom.

The other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

The Benefit Of Stock Firmware:

  • Flash Stock ROM to unbrick your 360 N7 Pro
  • Fix the boot loop problem
  • Upgrade and Downgrade
  • Unroot or Fix Bugs on your phone
  • Fix the lag or stutter on
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates
[quads id=2]

Pre-requirements to Install 360 N7 Pro Stock ROM:

  • Supported Phone: 360 N7 Pro
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

1. Take 360 N7 Pro Full Backup

- Advertisement -

Before going to install 360 N7 Pro stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

2. Download 360 N7 Pro Flash Tool And Drivers:

A.  Download and install 360 N7 Pro Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the QFIL QPST Flash Tool for as 360 N7 Pro Flash Tool because of this tool is very efficient and support all kind of Qualcomm phones.

Instructions to Flash 360 N7 Pro Stock ROM:

1. Download and install the driver and tool above. Then launch the QFIL tool.

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY and plug in the USB cable to connect to the computer.

3. On the QFIL tool, select the files, in turn, select the files in the 360 N7 Pro ROM folder.

4. After clicking Download, wait for the flash process to finish, the time is about 5-10.

5: During the flashing process, your device will restart automatically.

6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, You have successfully installed 360 N7 Pro Stock ROM using QFIL Flash tool.

Follow Detailed Instruction 360 N7 Pro Firmware Flashing With Qfil Flash Tool.

Disclaimer:

  • Read and understand the Full Guide before flashing.”360 N7 Pro Firmware”.
  • Use these instructions at your own risk.
  • Before flashing, Stock ROM on 360 N7 Pro must have a 70–80% charge.
[adinserter block=”4″]

360 N7 Pro Firmware:

Disadvantage

Gapps: Included No Root
Device Supported: 360 N7 Pro No Twrp And Nand Backup
Tool: QPST Tool – QFIL Qualcomm Flash Image Loader No Customization And Over cloaking
Soc: QCOM SD 710 No ADB Ad Block
Os: Android 8.1 Pre-installed OEM apps

[quads id=2]

Get Link

1 COMMENT

Comments are closed.