Please disable any ad-blocker you are using in your browser.

Home / How To / [MT6572] Intex Aqua Eco 3G Flash Files

[MT6572] Intex Aqua Eco 3G Flash Files

Intex Aqua Eco 3G Flash Files

 

Prerequisite To Flash Intex Aqua Eco 3G :-

  1. Download SP Flash Tool Newest SP Flash Tool is very useful utility for fixing soft brick or bootloop cases especially for the Media Tek devices. You could flash Stock or Custom ROMs of your choice.
  2. Download Mediatek Usb Vcom Drivers
  3. Stock Rom Flash Files For Intex_Aqua_Eco_3G_Andorid 4.4 kitkat

 

Next you need to install drivers in order to connect your device properly, just extract Driver_Auto_Installer_v1.1236.00.zip, and double-click “Install.bat”, and it will automatically install the necessary drivers, and you need to allow permissions for these drivers to be installed.

 

Intex Aqua Eco 3G MT6572 Flashing With SP Flash Tool :-

Check your Phone battery, you should have at least more than 50% and switch off your phone.
Unzip both SP Flash Toolv5.1532.zip and Stock rom.zip
Install and launch SP Flash Tool as shown below :-

 

Next click on the “Scatter loading” button and locate the scatter text from the unzipped ROM earlier, as shown below :-

 

Now click the “Download” button and connect your device (in off state) to the PC or Laptop via USB Cable and immediately press Volume Up button momentarily, and your device will be detected accordingly and initiating the flashing process, as shown below :-

It will complete the flash process in a minute or so, and when it is complete and successful, you see the yellow full bar and a big check mark as shown below :-

Now, you can switch on your device.

    Intex Aqua Eco 3G Flash Files, Intex Aqua Eco 3G MT6572 Android4.4.4 Firmware Flash File, Intex Aqua Eco 3G Official Stock Firmware, Intex Aqua Eco 3G Stock Rom Download, Intex Aqua Eco 3G Unbrick Guide, intex aqua eco 3g flash file, intex eco 3g flash file

Leave a Reply

Your email address will not be published. Required fields are marked *

*