Pre Requirements :
- Nokia Care Suite 5.0.0 PST (184.108.40.2062)
- Data Package Manager 4.3 (07/05/2013)
- UserGroupsConfiguration.cfg (no need to install)
It’s recommended full backup of your data, because the device will be completely reset to factory settings again. In addition, the procedure should be done with your smartphone having at least 50% load, and recommended that it be fully charged. Starting the process: After installing all of the above programs, open Navfirm and click cancel after be shown the login screen. Now look for the field “product code” and enter the code related to the device according to the list below:
- Product code 059W0X5 Black
- Product code 059W0X6 White
- Product code 059W0X8 Orange
- Product code 059W0X7 Green
In my case the first code was used, as tested on a device in black. Now just press the ENTER button on your keyboard and the device firmware is loaded in the list below according to the image, and you just select all files located on the right screen and click download. After this the Finnish firmware Lumia 930 not affiliated with carriers will be downloaded to your computer. Take the time needed to perform the download of the file and continue the necessary settings, extracting UserGroupsConfiguration.cfg file downloaded to the following folder, according to your operating system:
- If you use Windows x64 : “C: \ Program Files (x86) \ Nokia \ Nokia Care Suite \ Multi Software Updater 5.0” or “C: \ Program Files (x86) \ Nokia \ Nokia Care Suite \ Multi Software Updater 5.0”
- If you use Windows x86 : “C: \ Programmes \ Nokia \ Nokia Care Suite \ Multi Software Updater 5.0” or “C: \ Program Files \ Nokia \ Nokia Care Suite \ Multi Software Updater 5.0” or “C: \ Program Files \ Nokia \ Nokia Care Suite \ Multi Software Updater 5.0 “.
Replacing the Firmware:
. Open Nokia Care Suite and click “Product Support Tool For Store 5.0” by clicking on “Work Offline” so that the program can be started now go to the “File” tab and click on “Open Product” then inserting the open text box the number corresponding template to the Lumia 930, which is RM-1045 , then pressing OK. You return to the Home screen of the program, which now displays a picture of your device on the left side of screen by clicking on the “Programming” button and without then “Recovery”. Now look for the firmware downloaded through Navfirm, which will be in the folder chosen by you earlier. When you find the folder, copy all the files in it to the address C: \ ProgramData \ Nokia \ Packages \ Products \ RM-1045 , noting that the Program Data folder is hidden by default in Windows, the being necessary to change display settings for you find it. In addition, you may need to create the “rm-1045” and even the “Products” folder folder, if necessary the procedure can be performed without any problem. After this, go back to Product Support Tool For Store 5.0 click Update List , if it does not get out and open the program again. Should show an item as in the picture below, with the system version, the device variant and the chosen data packet. Then press the Start button, without your Lumia is connected to the computer , as this may corrupt the device system if errors occurred during the download system. It will then run a scan to verify the integrity of files, and then displays an error screen indicating the correct way to connect your device to your computer. It is worth noting that it is necessary that the drivers of your device are already properly installed in your machine, then close the program and connect your device to your PC if you have never done it before, because without it you can not go on. If you have already installed the drivers previously, just press the button volume down next to the power button on your Lumia 930 until a vibration is felt, only then connect the device to your computer via a USB cable and click “Retry “for the installation to begin running. we should point out that this step is extremely random , working on the first try in some cases while others will need to repeat it several times until everything works perfectly. To ease a little, switch off your device to display the error screen and simply plug it off the computer, it will then be started and the installation procedure will continue normally. If a screen with the error ” You have chosen not assigned product code for this device, do you wish to proceed? “appears after the start of firmware installation and you have chosen correctly the device to be installed, just click OK and follow without fear, because everything will be alright in the end. at the end of the process your device will reboot, and connect with the firmware of Finland with the update Lumia Cyan. After this, it is recommended that you carry out a Hard Reset to eliminate any incompatibility of previous files, just follow these steps:
- Turn off your device
- Tighten turn it on and press the Volume Down button repeatedly until an exclamation point appears
- Press the buttons in the following order: volume up, volume down, power and volume down. The device will vibrate and then will be displayed gears that indicate an ongoing process. After a few minutes your device will boot normally.
As previously mentioned, your device will be updated with the Lumia Cyan , being necessary to access a WiFi point and go to the settings menu> phone update> check for updates. You will then receive the update to Lumia Denim and your device will reboot, a new Hard Reset is recommended before you start using your Lumia 930 on a daily basis. If all has gone well, your device will restart with the new version Windows Phone . In addition, there appeared some other updates then, but only to fix possible bugs and improve the phone’s performance. It is worth remembering that the same procedure works for any device with Windows Phone by simply find the product code of your phone on a website such as GSM Hosting and model code, which can be found by accessing the settings menu> extras + info. Any questions, leave your comments below and we will respond as soon as possible!