Please disable any ad-blocker you are using in your browser.

Home / Android / How To Update Lenovo Vibe C2 K10a40 To Android 6.0 Marshmallow

How To Update Lenovo Vibe C2 K10a40 To Android 6.0 Marshmallow

How To Update Lenovo Vibe C2 K10a40 To Android 6.0 Marshmallow

You Can Use The Below Method For Upgrade Lenovo Vibe C2 K10a40 To Android 6.0 Marshmallow/And If You Want To Hard Reset It By Flashing The Stock Rom/ In Case If You Are Using Any Custom Rom And Want Back To Stock Rom And Official Firmware Or Facing The Boot loop Problem. This Method Is Also Useful For Sudden Death/Bricked/Not Power And Also After Flashing The Stock Rom imei Null or Unknown Baseband Problems Can Be Solve.

Download SP Flash Tool Newest SP Flash Tool is very useful utility for fixing soft brick or bootloop cases especially for the Media Tek devices. You could flash Stock or Custom ROMs of your choice.

Download MediaTek USB VCOM drivers

Windows 10/Pro users: READ: How To Install MTK VCOM Driver On WINDOWS 10 (32 & 64 bits)

Download the Stock Rom ForLenovo Vibe C2 K10a40 Android 6.0 Marshmallow :-

lenovo vibe c2 K10a40 S044 160817 ROW Stock Rom Download Password

IMPORTANT :-
Next you need to install drivers in order to connect your device properly, just extract Driver_Auto_Installer_v1.1236.00.zip, and double-click “Install.bat”, and it will automatically install the necessary drivers, and you need to allow permissions for these drivers to be installed.
1

2

3

Lenovo Vibe C2 K10a40 Android 6.0 Marshmallow Stock Rom Flashing With SP Flash Tool :-

Check your Phone battery, you should have at least more than 50% and switch off your phone.
Unzip both SP Flash Toolv5.1532.zip and Stock rom.zip
Install and launch SP Flash Tool as shown below :-

214829didxo68eoojjill1-jpg-thumb

Next click on the “Scatter loading” button and locate the scatter text from the unzipped ROM earlier, as shown below :-

214842lgnyk722wwsymyoy-jpg-thumb

Now click the “Download” button and connect your device (in off state) to the PC or Laptop via USB Cable and immediately press Volume Up button momentarily, and your device will be detected accordingly and initiating the flashing process, as shown below :-

ee

It will complete the flash process in a minute or so, and when it is complete and successful, you see the yellow full bar and a big check mark as shown below :-

z-9-wm

Now, you can switch on your device.

    Lenovo Vibe C2 K10a40 Official Firmware 6.0, lenovo k10a40 hard reset, lenovo k10a40 flash file , lenovo k10a40 firmware, cwm for lenovo vibe c2, lenovo k10a40 boot, lenovo C2 K10a40 stockrom, lenovo c2 cwm, how to reset lenovo k10a40 mobile, cwm lenovo vibe c2, lenovo k10a40 row, lenovo vibe c2 flash file, lenovo k10a40 custom roms

Leave a Reply

Your email address will not be published. Required fields are marked *

*