Galaxy Grand Prime LTE SM-G530F Firmware Flash File

By
Gadget Modder
-

Galaxy Grand Prime Plus SM-G532M

Download Firmware / Flash File For Galaxy Grand Prime LTE SM-G530F:

If your Galaxy Grand Prime LTE SM-G530F phone is corrupt or bricked. Download Galaxy Grand Prime LTE SM-G530F stock firmware from here. To get it back to working condition again.

All you have to do is simply download the below-given Galaxy Grand Prime LTE SM-G530F firmware files and tools on your PC. And then, follow the given instruction to install the Stock ROM on Galaxy Grand Prime LTE SM-G530F using SP Flash Tool. This guide is also helpful to unroot. Or fix any software malfunctioning problem.

There are various reasons to flash (Firmware on Galaxy Grand Prime LTE SM-G530F). 

For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it. Suppose you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

Advertisements

The Benefit Of Stock Firmware:

  • Flash Stock ROM to unbrick
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader
<strong>Requirements:</strong>
  • Charge your mobile: Your phone may no less than half a charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • Take Full Backup

Before going to install stock ROM, you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.
Most smartphones back up automatically in the background in case of incidents. To ensure a complete transition to your new device, a full backup is necessary.

These drivers are mainly for the devices powered by the MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

  • B. We use the Sp flash tool as Galaxy Grand Prime LTE SM-G530F Flash Tool because this tool is very efficient and support all kind of MTK phones.
<strong>Instructions to Flash Galaxy Grand Prime LTE SM-G530F Stock ROM:</strong>

1. First of all, Download the ‘Galaxy Grand Prime LTE SM-G530F flash file zip‘ given above and extract it on your computer’s desktop. Also, download and extract the sp flash tool.

Advertisements

2. Then download the USB driver and set it up on your computer. In case you have already installed the USB driver on your computer, skip this step.

3. Next, switch off your smartphone and take away the battery (if it is removable).

4. Now go to the sp flash tool extract folder and launch it.

5. As soon as the SP Flash tool is launched, click on the Download tab.

Advertisements

6. Now, click on the Scatter-loading button within the download tab.

7. Choose the scatter file from the firmware extract folder.

8. Now click on the Download button to start the flashing process.

9. Next, connect your phone to your computer using the USB cable (without battery – if the battery is removable) and press the volume up or volume down button at the same time.

Advertisements

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the Download OK green ring in SP Flash Tool.

Now, close the SP Flash tool and unplug your smartphone.

  • That’s it. Now you’ve successfully flashed stock ROM on your Galaxy Grand Prime LTE SM-G530F.

Follow Detailed Instruction To Flash Firmware With Sp Flash Tool.

Advertisements

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy Grand Prime LTE SM-G530F Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Download

samsung-SM-G530F-4.4.4-MT6572-ALPS.JB3.MP.V1.rar

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of MTK phones, you will have a brick even if you download these blocks read from a phone which you own!

Advertisements

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

RELATED ARTICLESMORE FROM AUTHOR