How To Flash Samsung Galaxy J7 J700H Clone MT6580

 

Prerequisite To Samsung Galaxy J7 J700H :-

  1. Download SP Flash Tool Newest SP Flash Tool is very useful utility for fixing soft brick or bootloop cases especially for the Media Tek devices. You could flash Stock or Custom ROMs of your choice.
  2. Download Mediatek Usb Vcom Drivers
  3. Download Galaxy J7 J700H Clone MT6580 Stock Rom Flash Files 

 

Next you need to install drivers in order to connect your device properly, just extract Driver_Auto_Installer_v1.1236.00.zip, and double-click “Install.bat”, and it will automatically install the necessary drivers, and you need to allow permissions for these drivers to be installed.

 

Samsung Galaxy J7 J700H Clone MT6580  Flashing With SP Flash Tool :-

Check your Phone battery, you should have at least more than 50% and switch off your phone.
Unzip both SP Flash Toolv5.1532.zip and Stock rom.zip
Install and launch SP Flash Tool as shown below :-

 

Next click on the “Scatter loading” button and locate the scatter text from the unzipped ROM earlier, as shown below :-

 

Now click the “Download” button and connect your device (in off state) to the PC or Laptop via USB Cable and immediately press Volume Up button momentarily, and your device will be detected accordingly and initiating the flashing process, as shown below :-

It will complete the flash process in a minute or so, and when it is complete and successful, you see the yellow full bar and a big check mark as shown below :-

Now, you can switch on your device.

Share If You Like My Work
    j700h mt6580 firmware, samsung clone j700h flash file, samsung clone j700h mt6589 firmware, samsung sm-j700h clone mt6572 flash file, samsung j700h/ds clone firmware, samsung galaxy clone mt6580 marshmallow firmware, How to use sp flash tool in samsung j700H 6580, samsung galaxy j9 clone drivers, samsung galaxy j7 clone mt6580 custom rom, samsung galaxy j7 clone firmware