Coolpad Mega 2.5D Firmware

The specific Coolpad Mega 2.5D Firmware comes with a Stock ROM of Coolpad Mega 2.5D. This helps you to bypass the FRP lock and revert from root and custom ROM.

Advertisement

Why would you want to flash Firmware on your Coolpad Mega 2.5D?

There are various reasons to flash (Firmware on Coolpad Mega 2.5D).

For example, your phone will be stuck or hang on the logo. You want to revert from the unofficial Nougat update.  If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of Coolpad Mega 2.5D Firmware:

  • Flash Stock ROM to unbrick
  • Software downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader

Coolpad Mega 2.5D Firmware Details:

  • Gapps: Included
  • Device Supported: Coolpad Mega 2.5D
  • Tool Supported: SP Flash Tool
  • Soc: MediaTek MT6735M
  • Os:

Download Coolpad Mega 2.5D Flash File:

 Coolpad_Mega_2.5D_019_MT6735M.zip
[quads id=2]

Requirements To Flash Coolpad Mega 2.5D Stock ROM:

  • Charge your mobile: Your phone may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

 Take Full Backup

Before going to install stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

Download Coolpad Mega 2.5D Flash Tool And Drivers:

A.  Download and install Coolpad Mega 2.5D Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by the MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as Coolpad Mega 2.5D Flash Tool because of this tool is very efficient and support all kind of MTK phones.

Instructions to Flash Coolpad Mega 2.5D Stock ROM:

1. First of all Download the ‘Coolpad Mega 2.5D flash file zip‘ which is given above and extract it on your computer’s desktop. Also, download and extract the sp flash tool.

2. Then download the USB driver and set up it on your computer. In case you have already installed the USB driver on your computer skip this step.

3. Next, switch off your smartphone and take away the battery (if it is removable).

4. Now go to the sp flash tool extract folder and launch it.

5. As soon as the SP Flash tool is launched, click on the Download tab.

6. Now, click on the Scatter-loading button within the download tab.

7. Choose the scatter file from the firmware extract folder.

8. Now click on the Download button to start the flashing process.

9. Next, connect your phone to your computer using the USB cable (without battery – if the battery is removable) and press the volume up or volume down button at the same time.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the Download OK green ring in SP Flash Tool.

Now, close the SP Flash tool and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM on your Coolpad Mega 2.5D.

Follow Detailed Instruction To Flash Firmware With Sp Flash Tool.

Disclaimer:

  • Read and understand the Full Guide before flashing.”Coolpad Mega 2.5D Firmware”.
  • Use these instructions at your own risk.
  • Before flashing, Stock ROM must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of MTK phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.