[Guide] How To Install CWM Recovery 5.0.2.8 HTC Wildfire S

CWM Recovery 5.0.2.8 HTC Wildfire S

Here Is The Guide To Install Clockworkmod recovery On Htc Wildfire S

Pre Requirements To Install CWM Recovery 5.0.2.8 HTC Wildfire S :-

Installation CWM Recovery 5.0.2.8 HTC Wildfire S :-

  1. Unzip fastboot.zip and paste the file to the root of your computer C: .
  2. Paste the file recovery-5.0.2.8-marvel.img on file fasboot Folder .
  3. If your mobile is connected to your computer, disconnect it. Remove the battery from your phone and then reinsert it.
  4. Press Power + Volume Down for a few seconds until the bootloader menu. Wait until the HBOOT loads.
  5. Then select Fastboot by pressing Power .
  6. Connect your phone to your computer via the USB cable.
  7. On your computer, press the Windows + R . A window opens. Type cmd and press on OK .
  8. A command window opens. Type the following code:
  9. [highlight bg=”#DDFF99″ color=”#000000″]cd c: fastboot[/highlight]
  10. then confirm by pressing Enter
  11. Then type the following code:
  12. [highlight bg=”#DDFF99″ color=”#000000″]fastboot flash recovery recovery-5.0.2.8-marvel.img[/highlight]
  13. then confirm by pressing Enter
  14. A vertical load will be displayed on your mobile. The wait time of the installation.
  15. At the end of installation, select reboot bootloader by pressing Volume Down button and press the Power .
  16. Then select BOOTLOADER by touch Power .
  17. Wait until the HBOOT charges then select Recovery by pressing Volume Down button and press the Power .
  18. Here, the Clockworkmod recovery 5.0.2.8 appears after a few moments.