Phicomm Clue 630 Firmware File [Stock ROM]

Phicomm Clue 630

Welcome To all in one thread for Phicomm Clue 630 in this post I will share all kinds of Phicomm Clue 630 Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Clue 630 software upgrade.

How To Flash Phicomm Clue 630 Firmware Stock ROM

“Phicomm Clue 630 Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is Clue 630 Stock Rom.

The other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

The Benefit Of Stock Firmware:

  • Flash Stock ROM to unbrick your Phicomm Clue 630
  • Fix the boot loop problem
  • Upgrade and Downgrade
  • Unroot or Fix Bugs on your phone
  • Fix the lag or stutter on
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates
[quads id=2]

Pre-requirements to Install Phicomm Clue 630 Stock ROM:

  • Supported Phone: Phicomm Clue 630
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

1. Take Phicomm Clue 630 Full Backup

Before going to install Phicomm Clue 630 stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

2. Download Phicomm Clue 630 Flash Tool And Drivers:

A.  Download and install Phicomm Clue 630 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the QFIL QPST Flash Tool for as Phicomm Clue 630 Flash Tool because of this tool is very efficient and support all kind of Qualcomm phones.

Instructions to Flash Phicomm Clue 630 Stock ROM:

1. Download and install the driver and tool above. Then launch the QFIL tool.

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY and plug in the USB cable to connect to the computer.

3. On the QFIL tool, select the files, in turn, select the Phicomm_Clue_630_MSM8909_151209_4.4 files in the Phicomm Clue 630 ROM folder.

4. After clicking Download, wait for the flash process to finish, the time is about 5-10.

5: During the flashing process, your device will restart automatically.

6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, You have successfully installed Phicomm Clue 630 Stock ROM using QFIL Flash tool.

Follow Detailed Instruction Phicomm Clue 630 Firmware Flashing With Qfil Flash Tool.

Disclaimer:

  • Read and understand the Full Guide before flashing.”Phicomm Clue 630 Firmware”.
  • Use these instructions at your own risk.
  • Before flashing, Stock ROM on Phicomm Clue 630 must have a 70–80% charge.
[adinserter block=”4″]

Phicomm Clue 630 Firmware:

Disadvantage

Gapps: Included No Root
Device Supported: Phicomm Clue 630 No Twrp And Nand Backup
Tool: QPST Tool – QFIL Qualcomm Flash Image Loader No Customization And Over cloaking
Soc: MSM8909 No ADB Ad Block
Os: Android 4.4 Pre-installed OEM apps

[quads id=2]

Get Link