BLU Studio 5.0 S II MT6582M Unbrick Wi Sp Flash Tool

BLU Studio 5.0 S II MT6582M Unbrick Wi Sp Flash Tool

mtk[box type=”info” align=”” class=”” width=””]You Can Use The Below Method For Upgrade BLU Studio 5.0 S II MT6582M  Android 4.2.1 Jelly Bean /And If You Want To Hard Reset It By Flashing The Stock Rom/ In Case If You Are Using Any Custom Rom And Want Back To Stock Rom And Official Firmware Or Facing The Boot loop Problem. This Method Is Also Useful For Sudden Death/Bricked/Not Power And Also After Flashing The Stock Rom imei Null or Unknown Baseband Problems Can Be Solve.[/box]

[box type=”download” align=”” class=”” width=””]

Download SP Flash Tool

Newest SP Flash Tool is very useful utility for fixing soft brick or bootloop cases especially for the Media Tek devices. You could flash Stock or Custom ROMs of your choice.

Download MediaTek USB VCOM drivers

Windows 10/Pro users: READ: How To Install MTK VCOM Driver On WINDOWS 10 (32 & 64 bits)

Download the Stock Rom For BLU Studio 5.0 S II MT6582M :-

Download  BLU_Studio_SII_D572A.rar Flash File. Mirror  Password If Needed

[/box]

[box type=”note” align=”” class=”” width=””]

IMPORTANT :-
Next you need to install drivers in order to connect your device properly, just extract Driver_Auto_Installer_v1.1236.00.zip, and double-click “Install.bat”, and it will automatically install the necessary drivers, and you need to allow permissions for these drivers to be installed.
1

2

3

[/box]

BLU Studio 5.0 S II MT6582M Stock Rom Flashing With SP Flash Tool :-

[box type=”shadow” align=”” class=”” width=””]

Check your Phone battery, you should have at least more than 50% and switch off your phone.
Unzip both SP Flash Toolv5.1532.zip and Stock rom.zip
Install and launch SP Flash Tool as shown below :-

214829didxo68eoojjill1-jpg-thumb

Next click on the “Scatter loading” button and locate the scatter text from the unzipped ROM earlier, as shown below :-

214842lgnyk722wwsymyoy-jpg-thumb

Now click the “Download” button and connect your device (in off state) to the PC or Laptop via USB Cable and immediately press Volume Up button momentarily, and your device will be detected accordingly and initiating the flashing process, as shown below :-

ee

It will complete the flash process in a minute or so, and when it is complete and successful, you see the yellow full bar and a big check mark as shown below :-

z-9-wm[/box]

[box type=”success” align=”” class=”” width=””]

Now, you can switch on your device.[/box]

Share If You Like My Work
    blu studio 5.0 ii d522u firmware, blu studio 5.0 s ii d572a flash file, blu studio 5.0 s ii lollipop, BLU Studio 5.0 S II MT6582M Unknown Baseband, blu studio 5.0 s ii update, blu studio 5 0 S II stock roms, MT6582M_Android_scatter download for a blu phone