BLU Amour D290A Android 4.0.4 Flash Files/Unbrick

BLU Amour D290A Android 4.0.4 Flash Files/Unbrick


Download SP Flash Tool

Windows 10/Pro users: READ: How To Install MTK VCOM Driver On WINDOWS 10 (32 & 64 bits)

Download the Stock ROM For BLU Amour D290A:-

Download  Pass


Next, you need to install drivers in order to connect your device properly, just extract, and double-click “Install.bat”, and it will automatically install the necessary drivers, and you need to allow permissions for these drivers to be installed.




BLU Amour D290A Stock Rom Flashing With SP Flash Tool:-

Check your Phone battery, you should have at least more than 50% and switch off your phone.
Unzip both SP Flash and Stock
Install and launch SP Flash Tool as shown below:-


Next click on the “Scatter loading” button and locate the scatter text from the unzipped ROM earlier, as shown below:-


Now click the “Download” button and connect your device (in off state) to the PC or Laptop via USB Cable and immediately press Volume Up button momentarily, and your device will be detected accordingly and initiating the flashing process, as shown below:-


It will complete the flash process in a minute or so, and when it is complete and successful, you see the yellow full bar and a big check mark as shown below:-


Now, you can switch on your device.

Share If You Like My Work
    BLU Amour D290A Flash Files, BLU Amour D290A Hard Reset, BLU Amour D290A Stock Rom Download, BLU Amour D290A Unknown Baseband, BLU Amour D290A Official Firmware, blu d210 custom recovery