[Android 6.0] Intex Aqua Power 4G Sotck Rom Flash Files

Intex Aqua Power 4G Sotck Rom Flash Files

Prerequisite To Flash Intex Aqua Power 4G MT6735 :-

  1. Download SP Flash Tool Newest SP Flash Tool is very useful utility for fixing soft brick or bootloop cases especially for the Media Tek devices. You could flash Stock or Custom ROMs of your choice.
  2. Download Mediatek Usb Vcom Drivers
  3. Stock Rom For Intex_Aqua_Power_4G_MT6735M_V08_Indian_SER

 

Next you need to install drivers in order to connect your device properly, just extract Driver_Auto_Installer_v1.1236.00.zip, and double-click “Install.bat”, and it will automatically install the necessary drivers, and you need to allow permissions for these drivers to be installed.

 

Intex Aqua Power 4G Flashing With SP Flash Tool :-

Check your Phone battery, you should have at least more than 50% and switch off your phone.
Unzip both SP Flash Toolv5.1532.zip and Stock rom.zip
Install and launch SP Flash Tool as shown below :-

 

Next click on the “Scatter loading” button and locate the scatter text from the unzipped ROM earlier, as shown below :-

 

Now click the “Download” button and connect your device (in off state) to the PC or Laptop via USB Cable and immediately press Volume Up button momentarily, and your device will be detected accordingly and initiating the flashing process, as shown below :-

It will complete the flash process in a minute or so, and when it is complete and successful, you see the yellow full bar and a big check mark as shown below :-

Now, you can switch on your device.

Share If You Like My Work
    aqua power 4g flash file, aqua power 4g ver 14 flash file, intex aqua power 4g flash file download, intex aqua power 4g flash file v08