Download Samsung firmware for Galaxy S21 FE 5G SM-G990E with region PAK Pakistan. This firmware has version number PDA G990EXXS1BVB8 and CSC G990EOJM1BVB8. The operating system of this firmware is Android 12 S.
Samsung Galaxy S21 FE 5G SM-G990E Firmware For Pakistan (Region PAK)
There are various reasons to flash “Stock Firmware. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: SM-G990E Pakistan (Region PAK)
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Firmware Details:
S21 FE 5G SM-G990E Pakistan (Region PAK) Android 12 Firmware Updates:
Galaxy S21 FE 5G SM-G990E PAK PDA G990EXXS1BVB8:
Model | SM-G990E |
Name | Galaxy S21 FE 5G |
Region | PAK – Pakistan |
OS Version | Android 12 S |
PDA | G990EXXS1BVB8 |
CSC | G990EOJM1BVB8 |
MODEM | G990EXXS1BVB8 |
Size | 5.92 GB |
Change list | 23341753 |
build date | 2022-02-18 |
Security Patch Level | 2022-02-01 |
binary | 1 |
Download | Google Drive |
How To Install Samsung Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the SM-G990E Firmware For Pakistan (Region PAK) files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your [hone finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Stock Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.